Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97
Publications associées (67)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
We have examined the yielding and fracture behavior of Zr57.4Cu16.4Ni8.2Ta8Al10 metallic-glass-matrix composites with a small volume fraction (similar to 4 pct) of ductile crystalline particles under quasi-static uniaxial tension and compression and dynami ...
We investigate the fragmentation of an elastic visco-plastic ring in the one-dimensional framework. The governing equations include the effects of large deformation, geometric softening, hydrostatic pressure and material's viscoplasticity. Linear perturbat ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
A one-dimensional fragmentation analysis that incorporates elastic wave propagation and a cohesive failure process is presented. An irreversible cohesive law models the internal crack nucleation and opening process, and the elastodynamic states of the inta ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
A comparison of experimental observations and computer simulations shows that trends in the occurrence and severity of center cracks in direct-chill (DC) cast ingots due to different initial casting speed histories may best be explained by the changes in v ...
A set of constitutive equations describing the plasticity of semiconductors is compared with the results of mechanical tests. Constant strain-rate compression tests are interrupted before the peak of the initial multiplication yield point, i.e. at the mome ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...