Modelling the effect of temperature on crack onset strain of brittle coatings on polymer substrates
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The irradiation hardening of the Eurofer97 steel following 590 MeV proton irradiations was determined at three different irradiation temperatures, 50 °C, 250 °C and 350 °C, and various doses up to about 1.3 displacement per atom. The dose and temperature d ...
A statistical model for fracture of aligned-whisker-reinforced metals was used to interpret tensile data of a TiB-reinforced titanium alloy. From this analysis, a TiB whisker strength of 8.0 GPa with a Weibull modulus of 2 was predicted. The analysis is co ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
The tensile behavior of adhesively-bonded double-lap joints composed of pultruded glass fiber-reinforced adherends and an epoxy adhesive was investigated under temperatures ranging between -35°C and 60°C. The load-elongation response was influenced primari ...
A novel electro-fragmentation method was developed as a fast alternative to the time consuming fragmentation test carried out in situ in a microscope, to investigate the failure of dielectric inorganic coatings on polymer substrates. An ultrathin conductiv ...
In bypass graft surgery, surgeons have turned to synthetic materials such as polyethylene terephthalate (Dacron) and expanded polytetrafluoroethylene (ePTFE) when lacking sufficient and suitable arteries or veins for the procedure. However, due to their lo ...
The role of reinforcing phase contiguity in high volume fraction particulate composites is investigated using model composites of pure aluminium reinforced with α-Al2O3 particles. To produce the composites, alumina particle (5µm) preforms were either loose ...
Transmission electron microscopy (TEM) has been used to investigate the effect of laponite clay on microdeformation in thin latex-based polystyrene (PS) films, in which the laponite was concentrated at the original interfaces between the PS particles. At r ...
Fe- or Mn-powders were mixed with the diamonds and the mixtures were heat treated under different gas atmospheres like hydrogen or argon gas and at varying temperatures in order to roughen the surface of the diamond particles. Subsequently the reaction lay ...
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
