Optofluidic modulator based on peristaltic nematogen microflows
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The main aim of this project was to develop novel concepts for miniaturization of bioanalytical techniques for investigating biomolecular interactions. We used optical tweezers to selectively address individual biological objects in microfluidic channels. ...
Spark assisted chemical engraving (SACE) is a method for 3D microstructuring of glass or other non-conductive materials with high aspect ratio and smooth surface quality. It is applicable for rapid prototyping of microfluidic devices, for MEMS interfacing ...
Optofluidic dye lasers are microfabricated liquid dye lasers enabled by the microfluidics technology. The integration of dye lasers with microfluidics not only facilitates the implementation of complete "lab-on-a-chip" systems, but also allows the dynamica ...
We have fabricated a microfluidic device based on a novel geometrical arrangement of lateral metal electrodes and a patterned insulator. We have used the concept of insulator-based "electrodeless" dielectrophoresis to achieve focusing and continuous separa ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007
An innovative method for fabrication and rapid prototyping of high-aspect ratio micromechanical components in photoresist is discussed. The photoresist is an epoxy-negative-tone resist, called SU-8, which can be structured to more than 2 mm in thickness by ...
"Lab-On-a-Chip" (LOC) systems are intended to transpose complete laboratory instrumentations on the few square centimetres of a single microfluidic chip. With such devices the objective is to minimize the time and cost associated with routine biological an ...
We present an original concept of manipulation of magnetic microbeads in a microchannel. It is based on the dynamic motion of a self-assembled structure of ferrimagnetic beads that are retained within a microfluidic flow using a local alternating magnetic ...
This article presents a new integrated microfluidic/microoptic device designed for basic biochemical analysis. The microfluidic network is Wet-etched in a Borofloat 33 (Pyrex) glass wafer and sealed by means of a second wafer. Unlike other similar microflu ...
SU-8 and polydimethylsiloxane (PDMS) are both transparent materials with properties very convenient for rapid prototyping of microfluidic systems. However, previous efforts of combining these two materials failed due to poor adhesion between them. Herein, ...
Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2009
