Use of webcams as tools for alignment and supervision of a Thomson scattering system in the near infrared
Publications associées (81)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A laser-induced depostion technique is used to produce platinum interconnection lines for microelectronic applications. The influence of the laser power as well as the vapor pressure of the precursor upon the geometry, the morphol. and the line resistivity ...
SF6 in a free jet was vibrationally excited by a continuous-wave CO2 laser. The subsequent energy transfer processes, in which vibrational energy is degraded, lead to changes in the beam's spatial, velocity and cluster-size distributions. These changes wer ...
Laser induced photolytic and pyrolytic deposition spots on silicon are studied for different laser powers, partial pressure and deposition time. In the photolytic case at low powers, the reaction takes place in the adsorbed phase on the surface, whereas at ...
The measurement of the tokamak plasma ion temperature can be obtained by collective Thomson scattering. This method requires a far infrared laser to achieve useful spatial resolution for typical tokamak plasma parameters. The very low Thomson scattering cr ...
A mol. beam mass spectrometer was constructed to study the formation of van der Waals clusters over a wide mass range. Using this app. (SF6)m was detected with 1 ? m ? 100 in the adiabatic expansion of SF6. By irradiating the SF6 jet with a continuous-wave ...
Microscopic ohmic contacts are made by laser chem. vapor deposition of platinum on a Pyrex substrate. The elec. cond. of the deposited metal stripes is measured as a function of the laser power, the writing speed, and the organometallic vapor pressure. The ...
The deposition of Ga on quartz substrates by photodissociation of trimethylgallium has been investigated. Light from a frequency doubled Ar-ion laser beam (257.2 nm) was focused onto quartz substrates. The Ar-ion laser was operated under CW or mode-locking ...
An interferometric technique was developed for detecting fast displacements of small areas in beam direction by less than λ/8. It utilizes a modified Michelson interferometer and a He-Ne laser light source. The technique was applied to measure the t ...
The laser-induced pyrolytic deposition of Pt spots on glass was studied for different laser powers, beam diams., and irradn. time. Laser powers up to 500 mW give deposition rates of typically 0.5 mm/s. Temp. calcns. as a function of time allows one to stud ...
Laser generated defects in (Al,Ga) As have been investigated by photochemical wet etching and TEM measurements. Photoetching reveals a 500 nm wide zone in the center of the processed area where according to laser power either a luminescent or a nonradiativ ...
Springer-Verlag (Springer Series in Chemical Physics 39)1984