Modified Wilson Plots for Enhanced Heat Transfer Experiments: Current Status and Future Perspectives
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...
The contribution of this thesis is a thorough study of thermal aware policy design for MPSoCs. The study includes the modelling of their thermal behavior as well as the improvement and the definition of new thermal management and balancing policies. The wo ...
The Advanced Single-stage Planar Actuator (ASPA) is a nanometer-accurate magnetically levitated planar actuator with moving magnets. It is designed at the Eindhoven University of Technology in collaboration with an industrial partner active in the semicond ...
For falling film evaporation, the most important thermal design parameters that need to be predicted are the onset of dryout, after which a severe degradation in the evaporator performance is found, and the local heat transfer performance in fully wet and ...
Granular solid targets made of fluidised tungsten powder have been long proposed and are being studied as an alternative configuration towards high-power (>1MW beam power) target systems, suitable for a future Super Beam facility or Neutrino Factory. A fea ...
This paper concentrates on the characterization of the heat flow present during flame cutting of 60 mm thick steel (S355N) flanges, a typical size used in the fabrication of bridge girders. Experimental results are associated with a finite element analysis ...
Thermal issues are one of the primary challenges in 3-D integrated circuits. Thermal through-silicon vias (TTSVs) are considered an effective means to reduce the temperature of 3-D ICs. The effect of the physical and technological parameters of TTSVs on th ...
In single- and two-phase flow heat exchangers (in particular "coils"), besides the straight tubes there are also many singularities, in particular the 180° return bends (also called return bends or U-bends). However, contrary to the literature concerning p ...
This investigation examines experimentally the effect of stators on the performance curves and the heat transfer capabilities of small axial cooling fans. The experimental data indicated that the results are highly affected by the flow conditions at the fa ...
This study examines experimentally the cooling performance of integrally cast impingement cooling channels which provide increased heat transfer area compared to traditional impingement configurations. For the evaluation of the heat transfer coefficient, t ...
