An array of 100 μm × 100 μm dielectric elastomer actuators with 80% strain for tissue engineering applications
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
Aeroelastic tailoring requires structural compliance and thus often conflicts with stiffness requirements to carry prescribed aerodynamic loads. Recently however, the application of cellular structural concepts has suggested the potential to achieve compli ...
The present work deals with the determination of mechanical properties of materials using instrumented indentation techniques. The main advantage of indentation testing is that it is relatively simple to perform and does not need any special and time-consu ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Current restrictions for human cell-based therapies have been related to technological limitations with regards to cellular proliferation capacity and maintenance of differentiated phenotype for primary human cell culture. In our experience, we have seen t ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
