Modelling the time-dependent rheological behaviour of heterogeneous brittle rocks
Publications associées (121)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
One of the key problems in dental biomechanics is the prediction of tooth mobility under functional loads. Understanding tooth displacement due to load is becoming more important as new solutions in dental restorations, prosthodontics and orthodontic treat ...
The deformation of copper with grain size less than 10 nm is investigated using a 2D continuum model incorporating atomistically-based constitutive relations. The local constitutive response of a series of symmetric and asymmetric tilt grain boundaries is ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
A set of constitutive equations describing the plasticity of semiconductors is compared with the results of mechanical tests. Constant strain-rate compression tests are interrupted before the peak of the initial multiplication yield point, i.e. at the mome ...
A comparison of experimental observations and computer simulations shows that trends in the occurrence and severity of center cracks in direct-chill (DC) cast ingots due to different initial casting speed histories may best be explained by the changes in v ...
Thermal creep tests have been conducted on the EUROFER 97 reduced activation ferritic/martensitic (RAFM) steel and two kinds of oxide dispersion strengthened (ODS) EUROFER 97 steels, which were manufactured using slightly different powder metallurgy techni ...
Dispersive mixing of high viscosity ratio blends was studied in a converging flow using a capillary rheometer equipped with dies having different entry profiles. Three inhomogeneous bimodal polyolefin blends, with stress-dependent viscosity ratios ranging ...
Constant strain-rate and creep tests have been performed on poly-quasicrystalline specimens of the icosahedral Al-Cu-Fe system. Three temperatures (870, 960 and 1000 K) have been investigated by creep for samples predeformed at constant strain-rate before ...
Two methods are employed to evidenced the stress behavior in c-BN films. On the one hand, in depth stress profile of c-BN film, deposited by ion beam assisted evaporation, was performed by recording infrared spectra and substrate curvature after reactive i ...
In-situ compact tension tests on binary lamellar titanium aluminide (TiAl) possessing the colony "polycrystalline" microstructure illustrate a range of damage phenomena and toughening mechanisms including crack nucleation across colony boundaries, plastic ...