Publication
Material Study of Micromachined Thin Film Solid Oxide Fuel Cells
Publications associées (260)
Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode
Sophia Haussener, Venu Gopal Agarwal
A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...
2024Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)
AbstractThe degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these c ...
EPFL2024Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films
This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...
EPFL2024Quasi-operando Transmission Electron Microscopy Diagnostics for Electrocatalytic Processes in Liquids
It is of great interest to the energy community to understand how the mechano-physico-chemical phenomena that eventually lead to device degradation are related to the startup, operation, and shutdown phases. For electrocatalytic systems operating in liquid ...
Swiss Chemical Soc2024HfC Sputtering parameters optimization and film characterization
Hafnium Carbide (HfC) is a refractory ceramic known for its exceptional properties, making it suitable for a wide range of applications. This project investigates the potential utilization of HfC in Micro or Nano Electromechanical Systems (MEMS/NEMS) and e ...
2023Pathways to enhance electrochemical CO2 reduction identified through direct pore-level modeling
Sophia Haussener, Etienne Boutin, Evan Fair Johnson, Shuo Liu
Electrochemical conversion of CO2 to fuels and valuable products is one pathway to reduce CO2 emissions. Electrolyzers using gas diffusion electrodes (GDEs) show much higher current densities than aqueous phase electrolyzers, yet models for multi-physical ...
2023An Advanced Alkaline Al-Air Fuel Cell Using L-Ascorbic Acid Interface Layer upon Al Anode via Gradient Anti-corrosion
Al metal is considered as an excellent anode material for metal-air fuel cells thanks to the advantages in terms of capacity and energy density. However, the anodic parasitic corrosion has brought great obstacles to the performance breakthrough of Al-air f ...
AMER CHEMICAL SOC2023Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects
Jan Van Herle, Peter Hugh Middleton, Thomas Benjamin Ferriday
The membrane electrode assembly is the powerhouse of the anion exchange membrane water electrolyser (AEMWE), thereby placing a great importance on the associated preparation conditions. This paper investigated how annealing temperature and time impacted ac ...
ELSEVIER2023Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis
The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...
EPFL2023Multidimensional Electron Imaging of Catalyst Layer Materials
The proton exchange membrane fuel cell (PEMFC) is an important technology for clean power generation in a decarbonized hydrogen system and is notably envisioned for applications in heavy-duty transportation. However, for cost and performance competitivenes ...
EPFL2023