Processing of Hybrid Glass-Fibre Reinforced Thermoplastic Nanocomposites
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
Liquid composite moulding of Lactam 12 monomer and activating system (APLC12) into satin weave carbon fabrics is investigated, with emphasis on minimising the void content in the final part. The main sources for void formation are identified. The solidific ...
The influence of the initial configuration of glass mat and polypropylene on the deconsolidation during post-processing of the resulting composite is investigated. Deconsolidation experiments of a classic type of glass mat reinforced thermoplastic (GMT) pr ...
The development of a reactive pultrusion process is presented by considering the advantages of an in situ polymerisation of thermoplastic lauryllactam monomers. The specifics of the reaction injection unit, of the fibre-drying oven and of different pultrus ...
The mode I inter-laminar fracture toughness of advanced knitted textile composites was investigated. Two complex weft-knitted glass fabrics were selected for the study: a triple rib knit and a Milano knit were impregnated with a tough epoxy resin and teste ...
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
Two forms of carbon fibre reinforced polyamide 12 (PA12) were compared during non-isothermal stamp forming. The first was a stretch broken commingled yarn woven into a fabric, studied at three initial preconsolidation levels. The second was produced by in ...
A new extruder design has been developed for the coextrusion of two-layer annular sections. The extruder consists of a conical stator-rotor-stator assembly, which performs extrusion from each side of the rotor. Flow within this assembly is fully three-dime ...
