Rapid Processing of Net-Shape Thermoplastic Planar-Random Composite Preforms
Publications associées (40)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Two forms of carbon fibre reinforced polyamide 12 (PA12) were compared during non-isothermal stamp forming. The first was a stretch broken commingled yarn woven into a fabric, studied at three initial preconsolidation levels. The second was produced by in ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Using an integrated processing methodology, an injection or compression moulded thermoplastic structure can be locally reinforced, for example, with textile structures or uni-directional fibre tows. Netshape components can be produced with cycle times typi ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
Innovative pretreatment by UVC light (185 nm) and by radio-frequency (RF) plasma at atmospheric pressure to functionalize the Nylon surface, increasing its bondability toward TiO2, is reported in this study In the case of UVC light pretreatment in air, the ...
Compression mouldings of commercial SMC were performed with an instrumented industrial press under various process conditions. Results underline the influence of process parameters such as the initial SMC temperature, the axial punch velocity and the geome ...
The bacterial inactivation efficiencies of silver metal and oxides and their combinations on textile fabrics was investigated to evaluate the disinfectant action on airborne bacteria. The inactivation performance was seen to depend on the amount of silver ...
Liquid composite moulding of Lactam 12 monomer and activating system (APLC12) into satin weave carbon fabrics is investigated, with emphasis on minimising the void content in the final part. The main sources for void formation are identified. The solidific ...
A novel thermoplastic composite preforming and moulding process is investigated to target cost issues in textile composite processing associated with trim waste, and the limited mechanical properties of current bulk flow- moulding composites. The thermopla ...