Thermal decay of UV Ar+ and ArF excimer laser fabricated Bragg gratings in SMF-28e and Bi-Al-doped optical fiber
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We report an experimental investigation of the magnetic normal modes in large-area Ni80Fe20 antidot arrays fabricated on commercially available silicon substrates using deep ultraviolet lithography at 248 nm exposing wavelength. The effect of the lattice s ...
Institute of Electrical and Electronics Engineers2010
Optical fiber materials with broad-band gain in the visible or in the telecommunication window are of great interest for optical communication or the biomedical domain in order to built integrated tunable lasers, amplifiers, ultra-short pulse lasers, or br ...
We demonstrated a continuously tunable optofluidic distributed feedback (DFB) dye laser on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip. The optical feedback was provided by a phase-shifted higher order Bragg grating embedded in the liquid cor ...
Fibers doped with bismuth show broad luminescence bands around 750, 1100, and 1400 nm with spectral bandwidths of 100 to 200 nm at room temperature. The luminescence bands can be observed by pumping broad absorption bands in the visible or near infrared sp ...
This paper gives a personal account of the research and development work at Bell Telephone Laboratories, Inc. during the first ten years following the first demonstration of semiconductor injection lasers. ...
The photosensitivity of germanium free Bi-Al-doped silica fibers with different bismuth concentrations was investigated using ArF excimer laser radiation at 193 nm and fiber grating formation. For the fiber with the highest bismuth concentration maximum re ...
ArF excimer laser irradiation of H2-loaded fibers increases the intensity of both the 1130 and 1390 nm fluorescence in Bi-Al-doped silica fiber by 18 dB and >16 dB. ...
We report the demonstration of low order distributed feedback (DFB) optofluidic dye lasers with reduced threshold. The laser chips were realized in polydimethylsiloxane using replica molding with two masters. A comparison between first, second, and third o ...
We present all-optical tuning and switching of a microcavity inside a two-dimensional photonic crystal waveguide. The photonic crystal structure is fabricated in silicon-on-insulator using complementary metal-oxide semiconductor processing techniques based ...
Electron beams in modern linear accelerators are now becoming limited in brightness by the intrinsic emittance of the photocathode electron source. Therefore it becomes important for large scale facilities such as free electron lasers to reduce this fundam ...
