Microstructure of single crystal Ni-based superalloys during blade manufacturing process and creep deformation
Publications associées (355)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The friction stress resulting from alloying elements in industrial alloys is an important strengthening mechanism. Since the preparation of single crystal from industrial material is difficult, no direct measurement of this quantity has been reported in li ...
A 'one-step' theory based on Pitsch distortion is proposed to explain the continuity between the orientations of the Kurdjumov-Sachs (KS), Nishiyama-Wassermann (NW) and Pitsch variants observed on the electron backscatter diffraction pole figures of marten ...
Nickel base superalloys are used for the manufacturing of monocrystalline turbine blades, due to their outstanding mechanical properties at high temperature. The mechanical properties strongly depend on the presence of γ’ precipitates in the γ matrix. Impr ...
Dislocation densities have been measured in Ni3Al(Hf) single crystals after deformation at various temperatures and strains. In addition, effective and athermal stresses have been determined by strain dip tests. A model is proposed for the strength anomaly ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
The intrinsic lattice resistance to dislocation motion, or Peierls stress, depends on the core structure of the dislocation and is one essential feature controlling plastic anisotropy in materials such as HCP Zn, Mg, and Ti. Here, we implement an anisotrop ...
In the current trend toward thicker aluminium plates, a major concern is the stress build-up during quenching which causes distortions during machining. Indeed, cooling rates are not high enough, especially at the core of such thick plates, to prevent any ...
Magnesium is an excellent candidate as lightweight structural material, but has strong plastic anisotropy, and the activation of, operation of, and competition between different slip and twinning systems remain active areas of research. Here, the nucleatio ...
The eutectic micro-constituent in SnAgCu solder governs the deformation behavior of the joint as it shows better deformation resistance than the Sn dendrites and occupies a high volume percentage of the whole solder. The main scope of this study is to deve ...
Oxide dispersion strengthened (ODS) ferritic/martensitic (F/M) steels are promising materials for high temperature applications. The hardening limits from room temperature to 1000 degrees C of one of such steel, ODS EUROFER97, together with the impact of t ...