Load dependence of oxidative wear in metal/ceramic tribocouples in fretting environment
Publications associées (38)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The adhesive wear process remains one of the least understood areas of mechanics. While it has long been established that adhesive wear is a direct result of contacting surface asperities, an agreed upon understanding of how contacting asperities lead to w ...
Tribological problems are particularly difficult to comprehend. Different physical mechanisms (including the environment, plastic deformation, third body interactions, phase transformations, recrystallization) interact at disparate length and time scales. ...
Knee and hip joint replacement implants involve a sliding contact between the femoral component and the tibial or acetabular component immersed in body fluids, thus making the metallic parts susceptible to tribocorrosion. Micro-motions occur at points of f ...
The dry wear and tribocorrosion behaviour of pulsed plasma treated and non-treated Ni-Cr alloys sliding against alumina at 15 N were investigated by using a reciprocating wear test rig equipped with an electrochemical cell. The pulsed plasma treatment prod ...
A good biocompatibility, excellent mechanical properties and high corrosion resistance characterize CoCrMo alloys. Therefore they are widely used for artificial joints in biomedical implants. However, the degradation of the implants during service life lea ...
Several metallic components of pressurized water reactors (PWR) used in nuclear power plants are exposed to the combined degradation by friction and corrosion (tribocorrosion). In PWR, corrosion arises from the water pressurized at 150 bars and maintained ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...
Wear is still the key problem causing the failure and limiting the lifetime of artificial hip joints, especially for the polymer acetabular cup in the metal-on-polymer and ceramic-on-polymer articulations. To reduce the wear, metal-on-metal articulation ha ...
The influence of oxygen content on the properties of cathodic arc-deposited AlCr(OxN1-x) coatings has been studied. All samples were prepared in a nitrogen-rich mixture of N-2 and O-2 at 550 degrees C using lateral rotating arc cathodes (LARC) technology t ...