Processing and Consolidation of TaC/HfC Based Composites Using MoSi2 and Carbon Nanotubes
Publications associées (46)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Embrittlement by helium was investigated in a lamellar TiAl alloy under two conditions: Specimens were implanted to various amounts of helium up to 762 appm at temperatures from 630 °C to 1000 °C and some of them subsequently creep-tested at the same tempe ...
Toughness in Ceramic Matrix Composites (CMCs) is achieved if crack deflection can occur at the fiber/matrix interface, preventing crack penetration into the fiber and enabling energy-dissipating fiber pullout. To investigate toughening in nanoscale CMCs, d ...
The improvement of the mechanical properties of carbon nanotube reinforced polycrystalline yttria-stabilized zirconia (CNT-YSZ) was questionable in earlier investigations due to several difficulties for processing of these composites. In the present articl ...
This research investigated the evolution of tensile, hardness, and fracture properties of Eurofer97 tempered martensitic steel following neutron irradiation. The irradiation-hardening was measured with Vickers hardness tests on broken parts of sub-sized co ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
Experiments and finite element simulations have been carried out to assess the warm pre-stressing effects on the effective fracture toughness of the high-chromium reduced activation tempered martensitic steel Eurofer97. The experiments have been conducted ...
Spark Plasma Sintering (SPS) method was practiced, in the current investigation, to obtain fully dense materials with an excellent dispersion of MWCNTs (Multi-walled Carbon Nanotubes) within the matrix. Scanning and transmission electron microscopy microgr ...
Fracture toughness tests are conducted at room temperature and 923 K (650 degrees C) on SENB (Single Edge Notched Bend) specimens of three different (alpha(2) + gamma ) TiAl-based alloys. One alloy is a conventional near fully lamellar Ti-45Al-2Mn-2Nb + 0. ...
Use of freeze granulated powders is successfully used as an industrially viable alternative to loose powder sintering for transparent polycrystalline alumina (PCA). Freeze granulation with narrow granule size distribution was realized after suspension cond ...
Fracture experiments in a notched semi-circular bend configuration were conducted to characterize rate effects and failure micromechanisms of a marble using a servo-hydraulic machine and a modified split Hopkinson pressure bar. Three real-time measurement ...