Piezoelectric AlScN thin films: A semiconductor compatible solution for mechanical energy harvesting and sensors
Publications associées (32)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Relaxor Pb(Mg1/3Nb2/3)O3(PMN) and its solid solutions with ferroelectric PbTiO3 (PT) are of considerable interest from both the applications and the scientific point of view. In the past, many attempts were made to prepare and study the properties of these ...
Strontium Bismuth Titanate is a very promising material for high temperature piezoelectric applications, its elevated ferroelectric phase transition (530°C), linear piezoelectric properties under low field and relatively low room temperature conductivity ( ...
Low-field piezoelectric coefficient and strain were investigated in Ca-modified PbTiO3 thin films by means of optical interferometry. A remanent piezoelectric coefficient of 70 pm/V was observed that agrees well with the values previously reported for the ...
Pb(Zr,Ti)O-3 (PZT) and Pb(Zr,Ti,Nb)O-3 (PNZT) thin films were grown on platinized silicon substrates by r.f. magnetron sputtering followed by a post-annealing treatment. The Niobium, Nb, concentration varied from 1 to 7 at.% by increment of 1 at.%. The eff ...
The effective piezoelectric coefficient e(31) has been measured on sol-gel processed Pb(ZrxTi1-x)O-3 thin films with Zr concentrations ranging from 45 to 60%. The largest value was observed at 45% Zr, although dielectric constant and effective d(33) peak a ...
Through the use of relations analogous to that of the Rayleigh law, it is demonstrated that the ac electric field dependence of the permittivity of ferroelectric thin films can be described. It is further shown that both reversible and irreversible compone ...
The effective piezoelectric coefficient e(31) has been measured on sol-gel processed Pb(ZrxTi1-x)O-3 thin films with Zr concentrations ranging from 45 to 60%. The largest value was observed at 45% Zr, although dielectric constant and effective d(33) peak a ...
Piezoelectric and dielectric aging was studied in Pb(Zr,Ti)O-3 (PZT) thin films and bulk ceramics. It was found that piezoelectric aging in thin films obeys the logarithmic time dependence with the relative aging rate much higher than that of the dielectri ...
The pyroelectric properties of Pb1-xCaxTiO3 (x = 0-0.3) thin films have been greatly improved by including porosity in the microstructure. Control of nucleation and growth by variation of the heating rate was used to process porous, low dielectric constant ...
Quasi-amorphous BaTiO3 thin films (see Figure) represent a polar ionic solid without spatial periodicity. Most probably, polarity of the quasi-amorphous BaTiO3 is associated with directional ordering of crystal motifs formed in the steep temperature gradie ...