High-level dataflow design of signal processing systems for reconfigurable and multicore heterogeneous platforms

The potential computational power of today multicore processors has drastically improved compared to the single processor architecture. Since the trend of increasing the processor frequency is almost over, the competition for increased performance has moved on the number of cores. Consequently, the fundamental feature of system designs and their associated design flows and tools need to change, so that, to support the scalable parallelism and the design portability. The same feature can be exploited to design reconfigurable hardware, such as FPGAs, which leads to rethink the mapping of sequential algorithms to HDL. The sequential programming paradigm, widely used for programming single processor systems, does not naturally provide explicit or implicit forms of scalable parallelism. Conversely, dataflow programming is an approach that naturally provides parallelism and the potential to unify SW and HDL designs on heterogeneous platforms. This study describes a dataflow-based design methodology aiming at a unified co-design and co-synthesis of heterogeneous systems. Experimental results on the implementation of a JPEG codec and a MPEG 4 SP decoder on heterogeneous platforms demonstrate the flexibility and capabilities of this design approach.

High-level synthesis of dataflow programs for heterogeneous platforms

Endri Bezati

The growing complexity of digital signal processing applications implemented in programmable logic and embedded processors make a compelling case the use of high-level methodologies for their design and implementation. Past research has shown that for complex systems, raising the level of abstraction does not necessarily come at a cost in terms of performance or resource requirements. As a matter of fact, high-level synthesis tools supporting such a high abstraction often rival and on occasion improve low-level design. In spite of these successes, high-level synthesis still relies on programs being written with the target and often the synthesis process, in mind. In other words, imperative languages such as C or C++, most used languages for high-level synthesis, are either modified or a constrained subset is used to make parallelism explicit. In addition, a proper behavioral description that permits the unification for hardware and software design is still an elusive goal for heterogeneous platforms. A promising behavioral description capable of expressing both sequential and parallel application is RVC-CAL. RVC-CAL is a dataflow programming language that permits design abstraction, modularity, and portability. The objective of this thesis is to provide a high-level synthesis solution for RVC-CAL dataflow programs and provide an RVC-CAL design flow for heterogeneous platforms. The main contributions of this thesis are: a high-level synthesis infrastructure that supports the full specification of RVC-CAL, an action selection strategy for supporting parallel read and writes of list of tokens in hardware synthesis, a dynamic fine-grain profiling for synthesized dataflow programs, an iterative design space exploration framework that permits the performance estimation, analysis, and optimization of heterogeneous platforms, and finally a clock gating strategy that reduces the dynamic power consumption. Experimental results on all stages of the provided design flow, demonstrate the capabilities of the tools for high-level synthesis, software hardware Co-Design, design space exploration, and power optimization for reconfigurable hardware. Consequently, this work proves the viability of complex systems design and implementation using dataflow programming, not only for system-level simulation but real heterogeneous implementations.

EPFL2015

Run-time Mapping of Applications on FPGA-based Reconfigurable Systems

David Atienza Alonso, Ivan Beretta

The role of Field-Programmable Gate Arrays (FPGAs) in System-on-Chip (SoC) design considerably increased in the last few years. Their established importance is due to the large amount of hardware resources they offer, as well as to their increasing performance, and furthermore to the support for reconfigurability. Even though FPGAs seem to have reached their maturity, there is still a lack of Computer-Aided Design (CAD) tools able to deal with dynamic reconguration. Existing algorithms aim at optimizing the performance of a set of applications, basing the computation on classic metrics (such as communication overhead), while reconfiguration-related issues are not taken into consideration. This work proposes a design methodology to map several applications on the FPGA area at run-time. Starting from a basic solution found at design-time for the initial set of applications, the proposed algorithm makes it possible to map a new application (not known at design-time), both minimizing the number of synthesis processes and optimizing the on-chip performance of the new application. Experimental results show that the proposed approach is able to achieve up to a 18% reduction in the number of reconfigurations with respect to an off-line static-mapping approach, while generally preserving the performance of the executed applications on the FPGA.

IEEE Press2010

Automated Design Flow for Multi-Functional Dataflow-Based Platforms

Endri Bezati, Simone Casale Brunet, Marco Mattavelli

The implementation of processing platforms supporting multiple applications by runtime reconfigurations on dedicated hardware modules requires the solution of different problems. These problems are notably not-trivial since both platform and application complexities increase year after year. As a consequence, the design process is both time and resource demanding. System configuration along with resources management and mapping remain one of the most challenging problem, particularly when runtime adaptation is required. In this direction, the ISO/IEC SC29WG11 committee (MPEG) has developed the so called MPEG-RVC standards ISO/IEC 23001-4 and 23002-4. This standard provides specifications of video codecs in the form of dataflow programs. In this paper, an integrated design flow to derive optimized multi-functional platforms directly from disjoined high-level specifications is presented. To the authors’ best of knowledge, such an optimization, synthesis and mapping methodology for coarse-grained reconfigurable systems design does not exist within the MPEG-RVC framework. The design flow presented in this paper leverages on an integrated set of independently designed tools, all supporting the RVC standard. Results assessment has been carried out on three different scenarios: an MPEG-RVC decoder, a standard baseline MPEG-RVC JPEG codec and a generalized reconfigurable multi-quality JPEG encoder. For all these scenarios, the proposed design flow has been targeted for a Xilinx Virtex 5 FPGA. Results show how this approach is capable of yielding a reconfigurable design that preserves the original performance of the stand alone non-reconfigurable platform providing, at the same time, considerable area savings featuring a larger set of functionalities. Moreover, platforms programmability, on the basis of the required functionality ID, is automatically handled at runtime without any designer effort.