Growth and Alignment of Thin Film Organic Single Crystals from Dewetting Patterns

Gian-Luca Bona, Thomas Geiger, Roland Hany, Jakob Heier, Raffaele Mezzenga, Gaëtan Wicht
Amer Chemical Soc, 2013
Article

Résumé

Studying and understanding the conditions under which organic semiconductors can be engineered to form aligned single crystals in thin films is of primary importance owing to their unique orientation-dependent optoelectronic properties. Efforts to reach this goal by self-assembly from solution-processed films have been rewarded only with limited success. In this article we present a new method to grow single crystalline thin films via solvent annealing. We identify solvate crystal growth in combination with a specific film dewetting morphology as key to successful fabrication of single crystals. Furthermore, these 2D single crystals can align on chemically patterned substrates to minimize their interfacial energy. We explore in situ the conditions for crystal formation and alignment.

Official source

https://infoscience.epfl.ch/record/188996?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Crystallization and Organic Field-Effect Transistor Performance of a Hydrogen-Bonded Quaterthiophene

Philippe Bugnon, Piotr De Silva, Holger Frauenrath, Jan Gebers, Bilal Özen, Riccardo Petraglia, Rosario Scopelliti, Stéphane Suarez

Crystalline thin films of pi-conjugated molecules are relevant as the active layers in organic electronic devices. Therefore, materials with enhanced control over the supramolecular arrangement, crystallinity, and thin-film morphology are desirable. Herein, it is reported that hydrogen-bonded substituents serve as additional structure-directing elements that positively affect crystallization, thin-film morphology, and device performance of p-type organic semiconductors. It is observed that a quaterthiophene diacetamide exhibits a denser packing than that of other quaterthiophenes in the single-crystal structure and, as a result, displays enhanced intermolecular electronic interactions. This feature was preserved in crystalline thin films that exhibited a layer-by-layer morphology, with large domain sizes and high internal order. As a result, organic field-effect transistors of these polycrystalline thin films showed mobilities in the range of the best mobility values reported for single-crystalline quaterthiophenes. The use of hydrogen-bonded groups may, thus, provide an avenue for organic semiconducting materials with improved morphology and performance.

2020

Chargement

Organic semiconductors are promising materials for future electronic and electroluminescence applications. A detailed understanding of organic layers and nano-sized crystals down to single molecules can address fundamental questions of contacting organic semiconductors at the nanometer limit and obtaining luminescence from them. In this thesis, electroluminescence spectra from pentacene, a policyclic hydrocarbon (acene), are discussed. The luminescence is induced by the current from the tip of a scanning tunneling microscope (STM). Pentacene is an organic semiconductor which gained a lot of attention in technology because of its electronic properties suitable for applications in thin film devices. Moreover, recent fundamental studies employed pentacene as a standard to demonstrate sub-molecular resolution by scanning probe techniques. This work reports the first observation of light emission from nanometer-sized pentacene crystals grown on an ultrathin insulating layer on noble metal surfaces. Different STM-techniques are combined to characterize the individual systems studied with respect to topography, crystal structure, electronic properties and work function changes. The initial step of the project was the implementation of an optical system for light collection from the tunnel-junction of a low-temperature STM. In the set-up, a novel approach based on the use of in situ adjustable lenses has been realized. Three lenses placed in the vicinity of the tip-apex allow light collection into three independent channels which can be used for versatile optical analysis. An important part in the characterization of the organic system was to clarify the interaction between adsorbed molecules and substrates. We investigated individual pentacene molecules on different ultrathin insulator-metal systems. With the STM tip in tunnel contact, the molecules are situated in a double barrier junction formed by the insulating layer on one side and the vacuum gap on the other side. The metal surface and the STM-tip form the electrodes. The electronic properties of pentacene in this configuration have been characterized. Insulator-metal-systems, which provide a good electronic decoupling for pentacene from the metal, have been chosen as substrates for the growth of pentacene nanocrystals. Using the sub-molecular resolution of the STM we resolved the structure of the top-layer of the pentacene nanocrystals and found that the crystal phase agrees with the pentacene bulk structure. Moreover, the comparison of charge injection barriers between individual molecules and nanocrystals of pentacene indicates a significant change of electronic properties after the formation of ordered structure from the individual building blocks. Optical spectroscopy of the emitted light reveals an excitonic emission from the nanocrystals, which is in very good agreement with photoemission spectra of macroscopic crystals. Although a highly localized current-injection by the STM tip is used for excitation, it can be concluded that the source of light emission is delocalized. In contrast to luminescence measurements reported for other organic materials in STM, the excitation is not localized on the individual molecule, into which a charge is injected by the STM-tip. Our study indicates the importance of inter-molecular coupling leading to a high mobility of the excited state which has to be considered in the framework of STM-induced luminescence. A further result is the observation of the Stark shift of pentacene luminescence, that has so far not been measured at large electric fields of the order of 1V/nm. The evaluation of the Stark shift provides information on dipole and polarizability change during the decay of an exciton. The measured large dipole change of the lowest singlet exciton in pentacene indicates a mixing of the Frenkel exciton (FE) with a small contribution of charge-transfer (CT). Finally, we developed a set-up for photon correlation measurements in the STM. The properties of photon statistics is a means which can unambiguously prove that the luminescence is due to a single-photon source, i.e. a light source which emits no more than one photon at a time. A typical example of such a source is the emission from a single molecule. We performed photon correlations measurements of the luminescence from pentacene and C60 nanocrystals. While the excitonic bulk emission of pentacene is not expected to represent a single photon emitter, we also did not observe anticorrelations in the case of C60 indicating the importance of the local environment in the STM-junction, e.g. the short distance to the metal electrodes.

EPFL2010

Chargement

Spatial and Morphological Control of Cyanine Dye Thin Films

Nicolas Alexandre Serge Leclaire

Cyanine dyes are organic semiconductor compounds with light absorption and emission properties useful for emerging technologies such as solar cells and light-emitting devices. The characteristics of these materials in the solid state depend on their organization of the constituting building blocks. This thesis focuses on controlling the morphology of cyanine dye thin films at different length scales and clarifying the resulting properties. When microstructures present features whose size matches visible light wavelengths, new properties may arise from light-matter interactions. Here the properties resulting from the light-matter interactions of cyanine droplet films cast from solution are studied. Based on experimental evidence, it is shown that dye droplet ensembles scatter light with different efficiencies and wavelength ranges depending on their dimensions. FDTD simulations are used to show that this effect results fromscattering enhancement at the absorption edge of the dye where the refractive index varies considerably. Simulations also provide a better understanding of individual dropletsâ interaction with light. While earlier work had hypothesized that the observed scattering phenomenon were due to crystalline clusters within the droplets, this work highlights the contribution of the dye filmmorphology. Cyanines also form single crystals whose fabrication induces molecular-scale order in the material. Previous work demonstrated that thin single crystals could be grown by solvent vapor annealing of dye droplets. Here it is shown that in uncontrolled conditions, cyanine single crystals destabilize to formdendritic crystals. In-situ microscopy observations highlight the solute reservoir role of the droplet distribution surrounding a growing crystal; when the distance between droplets and the crystal front is large, the solute supply is diffusion-limited. Moreover variations in local pressure equilibrium between the droplets and crystal front lead to advection fluxes which perturb the crystal growth. These observations help design configurations to either prevent crystal destabilization or take advantage of the dendritic growth in a controlled manner. In addition, the patterning of crystals on a substrate is relevant for their application in devices. A practical challenge is to induce single crystal growth at specific locations. Here, surfaces patterned with SAMs of hydrophilic and hydrophobic thiols are used to create dye droplet arrays from which crystals can be grown. This method is shown to yield local crystallization of the dye and to prevent crystal destabilization through better control of the droplet distribution. By varying the dye solution concentration, partial control over crystal density is achieved, however it proved difficult to control the number of nuclei per droplet. A more controlled evaporation and solvent vapor annealing system might be necessary to master the nucleation process. Finally the structure and optical properties of cyanine single crystals are addressed. The crystal structure was determined by X-ray diffraction. Structural aspects are shown to lead to excitonic couplings, which are evidenced by orientation-dependent spectroscopic measurements of single crystals. Although further investigation of the absorption band structure is necessary, the results are promising for photovoltaic devices as they might improve exciton transport compared to amorphous layers.

EPFL2018

Chargement

EPFL2010

Spatial and Morphological Control of Cyanine Dye Thin Films

Nicolas Alexandre Serge Leclaire

EPFL2018