3-D granular modeling and in situ X-ray tomographic imaging: A comparative study of hot tearing formation and semi-solid deformation in Al-Cu alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
This paper introduces the uniformity factor mu(2) for considering the local fiber distribution within elements made with Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC). The influence of mu(2) on the strain-hardening response of UH ...
As cast FeCrCuMnNi high entropy alloys were heat treated at different temperatures and times. Structure and mechanical properties of the heat treated alloy were studied using X-Ray diffraction, tensile test, hardness test and scanning electron microscopy. ...
Strain Hardening Ultra High Performance Fibre Reinforced Concrete (SH-UHPFRC), has a high tensile strength (over 10 MPa) and exhibit significant strain hardening (several parts per thousand) under tensile loads. These appealing features make it a suitable ...
Strain Hardening Ultra High Performance Fibre Reinforced Concrete (SH-UHPFRC), has a high tensile strength (over 10 MPa) and exhibit significant strain hardening (several ‰) under tensile loads. These appealing features make it a suitable material for impr ...
In this paper, a simple but realistic approach is presented to predict the as-quenched residual stress distribution in thick 7xxx aluminium alloy plates. Instead of modelling precipitation that occurs during quenching, a thermo-mechanical model is used who ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
An oxide dispersion strengthened ODS ferritic steel has been produced by mechanical alloying of Fe–14Cr–2W–0.2Ti (wt.%) prealloyed powder with 0.55 (wt.%) Fe2Y intermetallic particles and consolidated by hot isostatic pressing. The microstructure after the ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
