Publications associées à The relationship between the n-value and applied strain

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino, Frédéric Michel

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

Lausanne2024

Controlling superconductivity of CeIrIn5 microstructures by substrate selection

Philip Johannes Walter Moll, Maja Deborah Bachmann, Matthias Carsten Putzke, Chunyu Guo, Maarten Ruud van Delft, Joshua Alan Wolfe Straquadine

Superconductor/metal interfaces are usually fabricated in heterostructures that join these dissimilar materials. A conceptually different approach has recently exploited the strain sensitivity of heavy-fermion superconductors, selectively transforming regi ...

AIP Publishing2022

The DEMO magnet system - Status and future challenges

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Federica Demattè, Rainer Wesche, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PRO ...

2022

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Ortensia Dicuonzo

High Temperature Superconductors (HTS) are promising materials for future fusion magnets. One of HTS conductors' main issues is the quench protection: the quench develops much slower than in LTS, delaying the quench detection by voltage monitoring and caus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Advance in the conceptual design of the European DEMO magnet system

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta, Elena Gaio, Alberto Ferro

The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 20 ...

IOP PUBLISHING LTD2020

Metrology techniques for the verification of the alignment of the EU gyrotron prototype for ITER

Stefano Alberti, Jean-Philippe Hogge, Francisco Sanchez, Ioannis Pagonakis, Konstantinos Avramidis

The EU gyrotron for the ITER Electron Cyclotron (EC) heating system has been developed in coordinated efforts of the EGYC Consortium, Thales ED (TED) and Fusion for Energy (F4E) and under the supervision of ITER Organization Central Team. After the success ...

E D P SCIENCES2019

Hybrid HTS-Nb3Sn-NbTi DEMO CS coil design optimized for maximum magnetic flux generation

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Rainer Wesche, Ortensia Dicuonzo

The present work is performed within the framework of the EUROfusion DEMO project. Previously, it was demonstrated that for a maintained magnetic flux the use of HTS conductors at highest magnetic field in a layer-wound CS coil would allow the reduction of ...

ELSEVIER SCIENCE SA2019

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

The relationship between the n-value and applied strain

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

Controlling superconductivity of CeIrIn5 microstructures by substrate selection

The DEMO magnet system - Status and future challenges

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Advance in the conceptual design of the European DEMO magnet system

Metrology techniques for the verification of the alignment of the EU gyrotron prototype for ITER

Hybrid HTS-Nb3Sn-NbTi DEMO CS coil design optimized for maximum magnetic flux generation

Graph Chatbot

Chattez avec Graph Search

Metrology techniques for the verification of the alignment of the EU gyrotron prototype for ITER

Advance in the conceptual design of the European DEMO magnet system

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

The DEMO magnet system - Status and future challenges

Controlling superconductivity of CeIrIn5 microstructures by substrate selection

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Hybrid HTS-Nb3Sn-NbTi DEMO CS coil design optimized for maximum magnetic flux generation