Tensile fatigue behaviour of Ultra-High Performance Fibre Reinforced Concrete combined with steel rebars (R-UHPFRC)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper describes the behaviour of concrete subjected to tensile loads at high strain rates with and without compressive load histories. The tests, carried out at the laboratory of building materials of the Swiss Federal Institute of Technology, Zurich, ...
To improve the reduced available experimental data on the load capacity of full scale bridge deck slabs, 3 tests on a large scale bridge cantilever (10 x 4.2 m) were done. The cantilevers were tested under 4, 2 and 1 concentrated loads simulating traffic w ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
This paper describes the behavior of hybrid girders consisting of fiber-reinforced polymer (FRP) bridge decks adhesively connected to steel main girders. Two large-scale girders were experimentally investigated at the serviceability and ultimate limit stat ...
This paper describes the quasi-static and fatigue performance of hybrid bridge girders composed of cellular FRP bridge decks and steel girders. The FRP bridge deck is connected adhesively to the steel girders and acts as the top chord of the hybrid section ...
Fatigue experiments on adhesively connected pultruded profiles were performed in a laboratory environment. The first objective was to determine if fatigue limits exist and if so, how their magnitude is compared to real shear stress amplitudes in GFRP bridg ...
Axial tension-tension fatigue experiments were performed on pultruded glass fiber reinforced polymer (GFRP) plates in a laboratory environment. Different full-scale specimen shapes were examined: plate strips as-delivered, plate strips with tabs and plates ...
L’approche présentée dans cet article permet de considérer l’interaction entre effort tranchant et flexion en utilisant un modèle physique (et non pas une résistance conventionnelle dans une section de contrôle) où la résistance de l’effort tranchant est f ...
fib-CH, Swiss Contribution to the First fib Congress in Osaka2002
Construction methods for steel-concrete structures have developed significantly over the last quarter of a century, and the number of steel-concrete bridges on road and rail networks is continually increasing. However, design methods for bridges have not e ...
Reinforced concrete slabs supported on columns fail by punching when a conical plug of concrete perforates the slab above the column. This failure has been mostly investigated experimentally, so what can numerical simulation contribute to understand this p ...
