Bromate catalytic reduction in continuous mode using metal catalysts supported on monoliths coated with carbon nanofibers
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The principal objective of this thesis is the development of a palladium catalyst supported on woven fabrics of activated carbon fibers (ACF) for the reactions of hydrogenations in liquid phase and the design of multiphase reactors using the characteristic ...
Results concerning the coupling of the steam reforming and total oxidn. of methanol in a two-passage reactor are presented. A com. available copper-based catalyst is used for the steam reforming. For the total oxidn., a highly active cobalt oxide catalyst ...
The relation between the catalyst potential and the catalytic performance has been investigated in the gas-phase combustion of propylene with oxygen over rhodium catalysts at 375 DegC. The rhodium catalyst, deposited on yttria-stabilized zirconia (YSZ) sol ...
A novel composite material based on carbon nanofibers (CNF) grown on sintered metal fibers (SMFInconel) filter was investigated for its favorable properties as catalytic support. The CNF were formed directly over the SMFInconel by thermal (650 degrees C) c ...
Supported metal catalysts are important from both an industrial and a scientific point of view. They are used, amongst others, in large-scale processes such as catalytic reforming, hydrotreating, polymerization reactions and hydrogenations. Often, these ca ...
Theor. anal. of the reactor performance under unsteady-state conditions was carried out. The reactions are described by two kinetic models, which involve the participation in catalytic reaction of two types of active sites. The kinetic model I assumes the ...
This study addresses the development of a compact reactor for oxidative steam-reforming of methanol (OSRM) to produce hydrogen in autothermal mode for fuel cells. The string reactor uses catalytically active brass wires with a diameter of 500 mu m placed i ...
The aim of this work is to develop a microstructured reactor based on filamentous catalysts for the Oxidative Steam-Reforming of Methanol (OSRM), to produce hydrogen as feed for a fuel cell, in an autothermal way. Hydrogen is produced by the methanol Steam ...
The relation between the catalyst potential and the catalytic performance has been investigated in the gas-phase combustion of propylene with oxygen over rhodium catalysts at 375 DegC. The rhodium catalyst, deposited on yttria-stabilized zirconia (YSZ) sol ...
Catalytic hydrogenation of NO2- in water to N2 over Pd-supported on different woven fibrous materials was studied. Low porosity C fiber, low porosity D-type glass fiber, and composite (glass covered by g-Al2O3) fiber were used. Pd dispersion was compared f ...