Pullout of rough multiwall carbon nanotubes: A parametric study
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Low-cycle fatigue failure in titanium metal matrix composites is caused by two separate damage mechanisms: fatigue crack growth in the Ti matrix and fiber breakage. Here, a coupled numerical model for predicting both crack growth and fiber breakage is deve ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
A finite element model is used to study the stresses arising in ceramic matrix composites with different coatings and sliding interfaces. Stress concentrations in the fibers are found near matrix cracks, and their magnitudes depend on the location of the d ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
A micromechanically based model for the deformation, strength, and stress-rupture life of a ceramic-matrix composite is developed for materials that do not degrade by oxidative attack. The rupture model for a unidirectional composite incorporates fiber-str ...
The use of variable-focal-length (VFL) microlenses can provide a way to axially scan the foci across a sample by electronic control. We demonstrate an approach to coupling VFL microlenses individually to a fiber bundle as a way to create a high-throughput ...
The correlation between sizing formulation, bundle mechanical characteristics, and bundle-matrix static and dynamic interactions are investigated. Two glass-fiber sizing formulations are considered, one containing polyvinyl acetate (PVAc) and the other pol ...
The parameters affecting the packing stress of fiber mats for melt impregnation, resin transfer molding and compression molding are systematically investigated. An analytical equation based on local bending of fibers, which was previously derived for non-i ...
The effect of sizing on bending rigidity in fibre bundles was investigated. Particular attention was paid to the effect of film formers and anti-static agents on the behaviour of glass fibre bundles under forced packing conditions. The bending rigidity of ...
