On the influence of transgranular and intergranular failure mechanisms during dynamic loading of silicon nitride
Publications associées (33)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
A family of interatomic potentials is constructed for which the intrinsic ductility can be tuned systematically. Specifically, the elastic constants and critical energy release rate for Griffith cleavage, G(Ic), are held constant, while the critical energy ...
Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...
This poster shows simulation results of trasngranular fracture percentage in the ceramic microstructure under tensile loading. Moreover, the crack face roughness was investigated for microstructures with different grain sizes. ...
A 2D plane-strain dynamically propagating crack under tensile loading is simulated with cohesive elements. Information of the main crack is extracted from a diffuse crack network with the use of graph properties. Micro-transgranular fracture properties are ...
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...