Origin of the Spectral Shifts among the Early Intermediates of the Rhodopsin Photocycle

Bruno Araujo Cautiero Horta, Pablo Campomanes Ramos, Marilisa Neri, Ursula Röthlisberger, Ivano Tavernelli, Stefano Vanni
2014
Article

Résumé

A combined strategy based on the computation of absorption energies, using the ZINDO/S semiempirical method, for a statistically relevant number of thermally sampled configurations extracted from QM/MM trajectories is used to establish a one-to-one correspondence between the structures of the different early intermediates (dark, batho, BSI, lumi) involved in the initial steps of the rhodopsin photoactivation mechanism and their optical spectra. A systematic analysis of the results based on a correlation-based feature selection algorithm shows that the origin of the color shifts among these intermediates can be mainly ascribed to alterations in intrinsic properties of the chromophore structure, which are tuned by several residues located in the protein binding pocket. In addition to the expected electrostatic and dipolar effects caused by the charged residues (Glu113, Glu181) and to strong hydrogen bonding with Glu113, other interactions such as pi-stacking with Ala117 and Thr118 backbone atoms, van der Waals contacts with Gly114 and Ala292, and CH/pi weak interactions with Tyr268, Ala117, Thr118, and Ser186 side chains are found to make non-negligible contributions to the modulation of the color tuning among the different rhodopsin photointermediates.

Official source

https://infoscience.epfl.ch/record/198624?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Self-assembled monolayer (SAM) films have attracted immense attention for both fundamental and applied research. A SAM is composed of a large number of molecules with a head group that chemisorbs onto a substrate, a tail group that interacts with the outer surface of the film, and a spacer (backbone) chain group that connects the head and tail groups resulting in a coating. Interactions between spacer groups of different molecules, such as van der Waals forces and/or hydrogen bonding, hasten SAM film formation and contribute to its stability. In this dissertation, SAM and thin films have been formed onto copper and aluminum oxide surfaces by reaction with 1H,1H,2H,2H-perfluorodecyldimethylchlorosilane (PFMS), 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS), 1H,1H,2H,2H-perfluorodecylphosphonic acid (PFDP), octylphosphonic acid (OP), decylphosphonic acid (DP), and octadecylphosphonic acid (ODP). The properties and stability of the films were investigated employing complementary surface analysis techniques: X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), friction force microscopy (FFM), a derivative of AFM, contact angle measurements (CAMs), and Fourier transform infrared reflection/absorption spectroscopy (FT-IRRAS). The perfluoroalkylsilane SAM on Cu is found to be extremely hydrophobic typically having sessile drop static contact angles of more than 130° for pure water and a surface energy of 14 mJ/m2 (mN/m). FFM showed a significant reduction in the adhesive force and friction coefficient of PFMS modified Cu (PFMS/Cu) compared to unmodified Cu. Treatment by exposure to harsh conditions showed that PFMS/Cu SAM can withstand boiling nitric acid (pH=1.8), boiling water, and warm sodium hydroxide (pH=12, 60 °C) solutions for at least 30 minutes. Furthermore, no SAM degradation was observed when PFMS/Cu was exposed to warm nitric acid solution for up to 70 min at 60 °C or 50 min at 80 °C. XPS and FT-IRRAS data reveal a coordination of the PFMS silicon (Si) atom with a cuprate (CuO) molecule present on the oxidized copper substrate. The data give good evidence that the stability of the SAM film on the PFMS modified oxidized Cu surface is largely due to the formation of a siloxy-copper (-Si-O-Cu-) bond via a condensation reaction between silanol (-Si-OH) and copper hydroxide (CuOH). For a PFTS modified Cu surface (PFTS/Cu), the sessile drop static contact angle of pure water has been measured to be more than 125° and the surface energy to be typically less than 16 mJ/m2. Stability tests show that the PFTS/Cu film can survive in boiling pure water for one hour, boiling nitric acid (pH 1.5 or 1.8) for 30 minutes, sodium hydroxide solution (pH 12, 70 °C) for 30 minutes, and autoclave conditions (steam at 134 °C and 3 atmospheres) for 15 minutes. The more commonly used self-assembled monolayer (SAM) modifications of Cu surfaces, e.g. thiol compounds, are significantly less stable than PFTS/Cu. Extremely hydrophobic (low surface energy) and stable PFMS/Cu SAMs and PFTS/Cu films could be useful as corrosion inhibitors in micro/nanoelectronic devices and/or as promoters for anti-wetting, low adhesion surfaces or drop-wise condensation on heat exchange surfaces. XPS analysis confirmed the presence of perfluorinated and non-perfluorinated alkylphosphonate molecules on the PFDP, DP, and ODP SAMs deposited at the aluminum oxide coated silicon (Al/Si) surfaces. The sessile drop static contact angle of pure water on PFDP SAMs was typically more than 130° and on DP and ODP typically more than 125° indicating that the phosphonic acid SAMs reacted with Al samples were very hydrophobic. The surface roughness for PFDP/Al, DP/Al, ODP/Al, and bare Al was approximately 35 nm, as determined by AFM. The surface energy for PFDP/Al was determined to be approximately 11 mJ/m2 by the Zisman plot method compared to 21 mJ/m2 and 20 mJ/m2 for DP/Al and ODP/Al, respectively. PFDP/Al gave the lowest adhesion and friction force while bare Al gave the highest. The adhesion and friction forces for ODP/Al and DP/Al SAMs were in between. ODP, DP, and OP SAMs have been studied in detail on relatively flat aluminum oxide surfaces. The rms surface roughness for ODP/Al, DP/Al, OP/Al, and bare Al was less than 15 nm, as determined by AFM. The sessile drop static contact angle of pure water on ODP/Al and DP/Al was typically more than 115° and on OP/Al typically less than 105°. The surface energy for ODP/Al and DP/Al was determined to be approximately 21 mJ/m2 and 22 mJ/m2, respectively, compared to 26 mJ/m2 for OP/Al. ODP/Al and OP/Al were studied by FFM to better understand their micro-/nano-tribological properties. ODP/Al gave the lowest coefficient of friction values while bare Al gave the highest. The adhesion forces for ODP/Al and OP/Al were comparable. The chemical stability of ODP/Al, PFDP/Al, DP/Al, OP/Al, and PFMS/Al SAMs has been inspected by exposure to warm nitric acid (pH 1.8, 30 min, 60-95 °C). The XPS data and stability against harsh chemical conditions indicate that a type of bond forms between a phosphonic acid (PA) or silane molecule and the oxidized Al surface. Stability tests using warm nitric acid (pH 1.8, 30 min, 60-95 °C) show ODP/Al SAMs to be most stable followed by PFDP/Al, DP/Al, PFMS/Al, and OP/Al SAMs. For PFTS/Al, stability tests demonstrate that modified aluminum is able to survive exposure to warm nitric acid (pH = 1.8, 60 °C, 30 min) indicating some degree of robustness. Hydrophobic, low adhesion, and robust aluminum surfaces have useful applications for micro/nano-electromechanical systems (MEMS/NEMS), such as digital micro-mirror devices (DMDs). These studies are expected to aid in the design and selection of proper lubricants for MEMS/NEMS.

EPFL2007

Chargement

The environment is important for the exact course of a chemical reaction. As an example of the strong influence of the environment on the reaction, this work studies the isomerization reaction of the chromophore retinal in the binding pocket of the protein bacteriorhodopsin. Three selected distance scales with reference to the chromophore are addressed: The distant protein surface at a length scale of 3-5 nm, the fuzzy environment of the binding pocket (1-2 nm) and the immediate neighborhood represented by the amino acid tryptophan Trp86 (5 Å). First, static absorption and fluorescence spectroscopies are applied to three dimensionally crystallized bacteriorhodopsin. An especially adapted set-up was developed for each task. The analysis of data is carried out in comparison with the measured spectra of the native protein membrane in solution. While the absorption spectrum shows a broadening on the high-energy side, the fluorescence spectrum deviates in the general shape of that measured in solution. The synoptic analysis of all spectra reveals the existence of three spectroscopically distinct species in the crystal: BR490 (absorption maximum at 490 nm) with a relative contribution of 28%, BR570 (native spectrum of solution, 68%), and BR610 ("blue membrane", 4%). BR490 appears particularly in the additional fluorescence band at 550 nm and is assigned to the dehydrated species of bacteriorhodopsin. The presence of that particular species indicates the suppression of rehydration in a partially dehydrated crystal and shows that the three dimensional arrangement hinders water diffusion. A simple model, close domains are assumed to form, eventually suppressing free water diffusion in a crystal. The lack of water on the protein surface modifies the protonation states of the amino acids in the binding pocket and therefore the optical properties of the retinal. The chromophore actually reacts on the alteration of its distant environment upon incorporation in the protein crystal. The second distance scale - the fuzzy environment - is addressed by a time-integrated fluorescence spectroscopy on native bacteriorhodopsin as function of the excitation wavelength (430 nm to 650 nm). The optimized experimental set-up guaranteed that the fluorescence of only the excited state I460 contributed. The measured spectra show maxima at 740 nm, and exhibit a Stokes shift of 5000 cm-1, independent of the excitation wavelength. The similarity of the fluorescence excitation spectrum with the spectrum of absorbed photons excludes energy-dependent loss channels. However, the spectra show a growing asymmetric broadening on the high-energy side with decreasing excitation wavelength. The additional fluorescence originates from vibrational hot states, also supported by the decomposition by Gaussian functions. A comparison with the fluorescence spectrum of blue membranes shows that the low-energy part also arises from vibrational hot states. Consequently, the first fast intramolecular vibrational energy relaxation does not entirely distribute the access-energy to other modes. The remaining energy is found in a quasi-static occupation of vibrational modes. The subsequent second vibrational relaxation — probably not only involving the retinal but also the protein — takes place on a time scale similar to that of the isomerization. The fast isomerization reaction prevents dissipation of energy relaxation of the excited state of the retinal into the protein environment. On a third distance scale, femtosecond spectroscopy in the UV offers a direct view into the electrostatic interaction of the chromophore with its immediate neighborhood. For the first time, the retinal isomerization was studied within the spectral window of the tryptophan absorption from 265 nm to 310 nm. For this, a set-up adapted to UV wavelengths was realized, basing on non-linear optics. The developed single-shot detection system yields a sensitivity of 10-5 in optical density. In the transient absorption measurements, a time resolution of 90 fs was achieved. At short probe wavelengths (265 nm - 294 nm), the measured transients show first a fast reduction of the absorption which subsequently recovers on three time scales (380 fs, 3 ps, > 16 ps). With increasing probe wavelength an induced transient absorption becomes dominant (282 nm - 294 nm). It has a rise time of 280 fs, and decays with a time constant of 4.3 ps. With further increasing probe wavelength the absorption signal decays faster. In response to the complex signature of the transients, an iterative and model-independent transient-decomposition is introduced. A set of three basis elements were identified: one bleach, and two absorption transients. The two induced absorption transients are assigned to retinal. The dynamics of the excited state (I460) in the first retinal-transient is described by two time constants (280 fs and 1 ps). The fast time constant leads to the photoproduct, while the slower one leads back to the ground state, presumably by internal conversion. The 250 fs delayed onset of the second transient (photo-intermediate J) is connected to a wave packet motion in the excited state. This delayed onset of the transient was observed for the first time. It demands a rise time of the J photo-intermediate of only 280 fs. This contrasts common estimates of 500 fs given in literature. For the first time, the temporal behavior of the permanent dipole moment of retinal is observed experimentally. Its evolution is imprinted in the dominant bleach feature (265 nm - 294 nm), originating from tryptophan Trp86. In the excited state, the permanent dipole moment increases strongly within the first 250 fs, and decays exponentially afterwards, following the formation of the photoproduct. However, the related time constant of 380 fs is slightly greater than that of 280 fs of the photoproduct J. This discrepancy may indicate a remaining long-lived polarization of the binding pocket. In brief, by using the intrinsic tryptophan as a probe, the local evolution of the electric field during the isomerization reaction was investigated. Indeed the isomerization reaction is reflected in the immediate environment. The variety of optical spectroscopy provides methods especially adapted for studying the influences of the environment on a chemical reaction. The results achieved here highlight the importance of these influences.

EPFL2004

Chargement

EPFL2007

EPFL2004