INTERNAL STRESS GENERATION DURING QUENCHING OF THICK HEAT TREATABLE ALUMINIUM ALLOYS
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Structural stability issues in planar solid oxide fuel cells (SOFC) arise from the mismatch between the coefficients of thermal expansion (CTE) of the components. The stress state at operating temperature is the superposition of several contributions, whic ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Ferritic/martensitic steels considered as candidate first-wall materials for fusion reactors experience significant radiation hardening at temperatures below similar to400 degreesC. A number of experimental studies in ferritic alloys, performed at 1/2(111) ...
In an effort to better understand the plasticity of tempered martensitic steels, uniaxial tension and compression tests were carried out. The temperature dependence of both the yield stress and the post-yield stress behavior were compared, and it was shown ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
The following work deals with the characterisation of the behaviour of road bases granular material, made of tunnel excavation material and loaded by passing vehicle axles. This granular media, don't correspond generally to the standards demanded for the c ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
