Effect of thermal lag on glass transition temperature of polymers measured by DMA
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nowadays, one of the main alternatives for a more rational use of energy in heating applications is the heat pumping technologies. The market is dominated by two kinds of heat pump systems: the electrically driven vapor compression heat pumps (EHP), which ...
The sun is the biggest known source of energy in our solar system. We feel its strength when it gets hot during the the day and we notice its absence during the night when we feel cold. So as to be less dependent on the sun as an energy source, we implemen ...
Some aspects of the thermal behavior of the Opalinus claystone are investigated through laboratory tests conducted on a new hollow cylinder triaxial apparatus specially designed for studying the thermo-hydromechanical behavior of very low permeable materia ...
The optimization of powders preparation and consolidation process leads to the achievement of a high thermoelectric figure of merit (ZT=1.25 at 800°C) in an n-type silicon-germanium (SiGe) alloy hot pressed at low heating rate. It has been experimentally o ...
We report here on an integrated mini-lamp module (15x26x4 mm3) with a microfabricated rf-powered Rb dielectric barrier discharge (DBD) lamp (10x10x3 mm3) positioned on top of a 0.6 mm thick (thickness adjustable) 4-layer LTCC (Low Temperature Co-fired Cera ...
The effect of low-temperature curing on the physical characteristics of a commercial cold-curing epoxy adhesive was experimentally and analytically investigated with a view to a potential application in bridge construction in winter. Curing at low temperat ...
Healing of epoxy resins can be accomplished using a combination of embedded ethyl phenylacetate (EPA) solvent loaded capsules and shape memory alloy (SMA) wires. Upon crack formation, the EPA solvent diffuses in the resin and induces swelling which tends t ...
In the present study, the sintering behavior of a commercial nano alumina powder with an initial particle size of 100 nm was investigated. The shrinkage response of the powder formed by pressure filtration (PF) during non-isothermal sintering was measured ...
Dynamic Mechanical Analysis was conducted on a polyurethane adhesive at different constant heating rates up to 100°C, covering the glass transition range. Different storage modulus degradation curves were obtained from different heating rates. The differen ...
A waterborne latex-based technique has been used to prepare acrylic films with laponite contents up to about 25 vol%. The laponite was attached to the surfaces of the latex particles, giving a cellular arrangement of laponite-rich regions at high laponite ...
