Integrated circuit layout design protectionLayout designs (topographies) of integrated circuits are a field in the protection of intellectual property. In United States intellectual property law, a "mask work" is a two or three-dimensional layout or topography of an integrated circuit (IC or "chip"), i.e. the arrangement on a chip of semiconductor devices such as transistors and passive electronic components such as resistors and interconnections.
PrecodingPrecoding is a generalization of beamforming to support multi-stream (or multi-layer) transmission in multi-antenna wireless communications. In conventional single-stream beamforming, the same signal is emitted from each of the transmit antennas with appropriate weighting (phase and gain) such that the signal power is maximized at the receiver output. When the receiver has multiple antennas, single-stream beamforming cannot simultaneously maximize the signal level at all of the receive antennas.
Ethernet physical layerThe physical-layer specifications of the Ethernet family of computer network standards are published by the Institute of Electrical and Electronics Engineers (IEEE), which defines the electrical or optical properties and the transfer speed of the physical connection between a device and the network or between network devices. It is complemented by the MAC layer and the logical link layer. The Ethernet physical layer has evolved over its existence starting in 1980 and encompasses multiple physical media interfaces and several orders of magnitude of speed from 1 Mbit/s to 400 Gbit/s.
Mobile technologyMobile technology is the technology used for cellular communication. Mobile technology has evolved rapidly over the past few years. Since the start of this millennium, a standard mobile device has gone from being no more than a simple two-way pager to being a mobile phone, GPS navigation device, an embedded web browser and instant messaging client, and a handheld gaming console. Many experts believe that the future of computer technology rests in mobile computing with wireless networking.
Channel access methodIn telecommunications and computer networks, a channel access method or multiple access method allows more than two terminals connected to the same transmission medium to transmit over it and to share its capacity. Examples of shared physical media are wireless networks, bus networks, ring networks and point-to-point links operating in half-duplex mode. A channel access method is based on multiplexing, that allows several data streams or signals to share the same communication channel or transmission medium.
Intégration à très grande échelleL'intégration à très grande échelle (ou VLSI pour Very-Large-Scale Integration en anglais) est une technologie de circuit intégré (CI) dont la densité d'intégration permet de supporter plus de 100 000 composants électroniques sur une même puce. Elle a été réalisée pour la première fois dans les années 1980, dans le cadre du développement des technologies des semi-conducteurs et des communications. Les premières puces à semi-conducteurs supportaient un seul transistor chacune.
Téléphonie mobileLa téléphonie mobile, ou téléphonie cellulaire est un moyen de télécommunication, plus précisément de radiocommunication, par téléphone mobile. Ce moyen de communication s'est largement répandu à la fin des années 1990. La technologie associée bénéficie des améliorations des composants électroniques, notamment leur miniaturisation, ce qui permet aux téléphones d'acquérir des fonctions jusqu'alors réservées aux ordinateurs.
Wireless LANA wireless LAN (WLAN) is a wireless computer network that links two or more devices using wireless communication to form a local area network (LAN) within a limited area such as a home, school, computer laboratory, campus, or office building. This gives users the ability to move around within the area and remain connected to the network. Through a gateway, a WLAN can also provide a connection to the wider Internet. Wireless LANs based on the IEEE 802.11 standards are the most widely used computer networks in the world.
Hybrid integrated circuitA hybrid integrated circuit (HIC), hybrid microcircuit, hybrid circuit or simply hybrid is a miniaturized electronic circuit constructed of individual devices, such as semiconductor devices (e.g. transistors, diodes or monolithic ICs) and passive components (e.g. resistors, inductors, transformers, and capacitors), bonded to a substrate or printed circuit board (PCB). A PCB having components on a Printed Wiring Board (PWB) is not considered a true hybrid circuit according to the definition of MIL-PRF-38534.
Efficacité spectraleEn transmissions numériques, l'efficacité spectrale η se définit comme étant le rapport entre le débit binaire (en bit/s) et la bande passante (en Hz). Nous pouvons aussi dire que c'est le nombre de données binaires envoyés sur le canal de communication par ressource temps-fréquence (par accès au canal ou channel use). L'efficacité spectrale d'une modulation se définit par le paramètre : η = D/B et s'exprime en "bit par seconde et par hertz". La valeur D est le débit binaire (en bit/s) et B (en Hz) est la largeur de la bande occupée par le signal modulé.
