Publication

Atoms to Autos: A Multi-scale Approach to Modeling Aluminum Deformation

Publications associées (32)

Two-phase modelling of hot tearing in aluminium alloys using a semi-coupled method

Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...

EPFL2007

Fracture strength and Young's modulus of ZnO nanowires

Christophe Ballif, Johann Michler

The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 μm were manipulated with an atomic force microscopy tip ...

2007

Effects of neutron irradiation on the microstructure and mechanical properties of the heat affected zone of stainless steel welds

The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...

EPFL2005

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

Andreas Mortensen, Ludger Weber, Reza Tavangar Hamzehkolaei

The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...

2005

Rheological Behavior of Al-Cu Alloys during Solidification: Constitutive Modeling, Experimental Identification, and Numerical Study

Jean-Marie Drezet

The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...

2005

Fracture resistance of mineral reinforced polyamide 6

John Christopher Plummer

Tensile tests have been carried out over a wide range of test speeds on compact tension specimens of polyamide 6 containing spherical silica particles, whose size and content had been adjusted to give optimum impact performance in conventional impact tests ...

2004

Irradiation induced behavior of pure Ni single crystal irradiated with high energy protons

Zhongwen Yao

The microstructure and tensile behavior of pure single crystalline Ni irradiated to low doses at room temperature with 590 MeV protons are investigated. Tensile tests performed at room temperature show radiation induced hardening, which increases with incr ...

2003

Discontinuously reinforced titanium matrix composites for fusion applications

We have reinforced alpha-Ti with different contents of TiC particles using the in situ technique and conventional casting. Compositional and microstructural characterization of the TiC/Ti composite material was made by XRD and SEMEDS. Tensile tests at RT, ...

2002

The microstructure and associated tensile properties of irradiated fcc and bcc metals

Nadine Baluc, Yong Dai

The differences and similarities of behaviour between fee and bcc metals after irradiation have been investigated. For this purpose, fee Cu, Pd and 304 stainless steel and bcc Fe, Mo and Mo-5% Re were irradiated with either neutrons or 590 MeV protons at t ...

2000

Tensile tests on optical fibre cables using distributed Brillouin analysis

Luc Thévenaz, Philippe Robert, Alexandre Fellay

On-site distributed strain measurements using an original Brillouin analyser were performed on cables using standard tensile test bench and on critical installations in the Swiss telecom network. ...

Christian Boisrobert, Université de Nantes1999

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search