Estimation of statistical strength distribution of Carborundum polycrystalline SiC fiber using the single fiber composite with consideration of the matrix hardening
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
During reheating and post-processing of thermoplastic-based composites, deconsolidation is often observed: the volume fraction fibre decreases and the void content increases. In this article, the phenomena leading to deconsolidation are investigated, with ...
An optical fiber Bragg grating (FBG) embedded in an epoxy matrix is indubitably subjected to non-negligible residual stresses arising from the cure, especially for a strong fiber-matrix interface. The spectral response of the FBG sensor is clearly influenc ...