FIBER FRAGMENTATION IN A SINGLE-FILAMENT COMPOSITE
Publications associées (57)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this paper, an exact solution is derived for the characterization of thermal stresses in a single-fibre composite of finite length. All the required boundary and interfacial conditions of the thermo-elastic problem are thus satisfied exactly. The propos ...
The statistical strength distribution of Carborundum polycrystalline SiC fibers was derived from the fragmentation process in a single fiber/epoxy composite. We conducted Monte Carlo simulations of the fragmentation process using an elastic-plastic hardeni ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
Particle Reinforced Metal Matrix Composites (PRMMCs) are produced by high-pressure infiltration of ceramic particle beds. Matrix materials are either pure Al or Al-4,5%Cu, and the reinforcement is made either of angular or of polygonal alumina particles. T ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...