Time-dependent failure in fiber-reinforced composites by matrix and interface shear creep
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...
Al-6.4 wt% Ni open-cell foams produced by replication are tested in compression and in tension at room temperature and creep tested in tension at 450C. The mechanical behaviour of this foam at room temperature is consistent with that observed for other ope ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
The statistical strength distribution of Carborundum polycrystalline SiC fibers was derived from the fragmentation process in a single fiber/epoxy composite. We conducted Monte Carlo simulations of the fragmentation process using an elastic-plastic hardeni ...
A new technique is proposed for the direct measurement of capillary forces in systems of relevance to the infiltration processing of metal matrix composites. Capable of handling melt temperatures up to 1500 K and infiltration pressures up to 20 MPa, the te ...
Ceramic composites reinforced with nanoscale materials such as nanotubes are widely expected to have superior mechanical properties compared with more conventional composite materials. However, new work shows that the toughness of these nanocomposites can ...
An optical fiber Bragg grating (FBG) embedded in an epoxy matrix is indubitably subjected to non-negligible residual stresses arising from the cure, especially for a strong fiber-matrix interface. The spectral response of the FBG sensor is clearly influenc ...