Tough-to-brittle transitions in ceramic-matrix composites with increasing interfacial shear stress
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...
We have used in situ X-ray scattering and finite element modeling (FEM) to examine the micromechanics of deformation of in situ formed metallic-glass-matrix composites consisting of Ta-rich particles dispersed in an amorphous matrix. The strain measurement ...
In this paper, we use the established cohesive element method to investigate the probabilistic failure of a model ceramic system under dynamic tensile loading. Monte-Carlo simulations are performed to calculate the fracture strength of a monolithic silicon ...
Quasi-static axial tension experiments were performed in a laboratory environment on epoxy bonded, balanced double-lap and single-lap joints from pultruded GFRP flat sections. Full-scale specimens were used to avoid size effects. Parameters investigated we ...
Fibres fracture gradually during the fatigue cycling of continuous alumina fibre reinforced aluminium. The number of fibre breaks increases linearly with the logarithmic cycle number, depends on the maximum stress and the stress ratio, and agrees with publ ...
BACKGROUND: Although shoulder arthroplasty is an accepted treatment for osteoarthritis, loosening of the glenoid component, which mainly occurs at the bone-cement interface, remains a major concern. Presently, the mechanical effect of the cement mantel thi ...
Recently, high-strength zirconia-toughened alumina (ZTA) ceramic substrates have attracted interest, because they offer much improved mechanical properties over straight alumina, while maintaining advantages such as good thermal conductivity and chemical s ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The construction principles of "Timber-Glass-Composite-Girders" demand practical and theoretical research to ensure reliable designs. Toward this objective the mathematical description of load-bearing and the non-rigid bond is the subject of this work, i.e ...
The importance of Fibre Reinforced Polymers (FRPs) as a material used for civil engineering purposes has grown in the last decade. Especially the introduction of pultrusion at an industrial level as a way to produce big batches of FRP made it possible to o ...
