Multiaxial fatigue criterion accounting for anisotropy in forged components
Publications associées (38)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this work, we demonstrate that template-assisted electrodeposition is a viable route for fabricating fully metallic 3D micro-architectures with tailored properties. Firstly, we show that the process can be controlled with the aid of a 3D time-dependent ...
The accumulative roll bonding process is one of the most prominent severe plastic deformation processes for obtaining sheet materials with ultra-fine-grained microstructures and high strength. The properties of such sheets differ significantly from those o ...
In this study the influence of tip leakage on the performance of a small-scale fan is evaluated through computational fluid dynamics. ANSYS CFX Release 18.1 is employed for the numerical simulations, the results are extracted, analyzed and compared to the ...
Fabric characteristics and shear deformation behaviour were analysed in four intact small-scale samples, including two disturbed and two undisturbed samples of naturally deposited sand from a shoal in the San Francisco Bay. Triaxial compression tests were ...
The present paper focuses on the numerical simulation of the interaction of laser-generated bubbles with a free surface, including comparison of the results with instances from high-speed videos of the experiment. The Volume Of Fluid method was employed fo ...
Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
A 2D plane-strain dynamically propagating crack under tensile loading is simulated with cohesive elements. Information of the main crack is extracted from a diffuse crack network with the use of graph properties. Micro-transgranular fracture properties are ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
It is well known that strong concurrent precipitation, mainly located along grain/subgrain boundaries, results in a coarse and elongated grain structure, and unusual sharp P {011} and/or M {113} texture components during annealing of supersatur ...
