Prediction of tantalum microstructure evolution during thermomechanical treatments using FEM calculations with a dislocation density based constitutive law
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Spliced longitudinal reinforcement may result in a reduction of both strength and displacement capacity of reinforced concrete (RC) members. This applies in particular when lap splices are located in regions where inelastic deformations concentrate, such a ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The ductility and time-dependent recovery of a ductile acrylic adhesive were investigated in this work. The quasi-static true tensile and compressive strain behaviors were examined at different strain rates, taking large deformations into account. Yield st ...
We present a simple open-loop method to increase the response speed and suppress the viscoelastic creep of dielectric elastomer actuators. The parameters of the model can be extracted from two simple measurements: a strain vs. voltage ramp, and the strain ...
In this paper, a thermoviscoplastic constitutive model for geomaterials is presented. The model is formulated based on two aspects: (i) the nonstationary flow surface theory, which is used to describe the viscous behaviour of geomaterials, and (ii) the the ...
Metal fatigue during cyclic loading puts an endurance limit on most of today's technology. It impacts the reliability of metallic components used for transportation, electronic devices and energy production because fatigue failure can occur without any app ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
Dynamic and post-dynamic recrystallization kinetics were investigated during hot-working of Inconel 718 as a function of temperature,strain and strain rate in the single phase domain.The post-dynamic evolution was found to be extremely fast and impacting s ...
This thesis advances the field of dielectric elastomer actuators (DEAs) through the development of device designs, fabrication processes, strain characterization technique and modelling tool. It provides the first demonstration that DEAs can be interfaced ...
In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...
