The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Harmonic tension–compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the con ...
Neutron and synchrotron X-ray diffraction spectra have been acquired during room temperature tensile deformation of a creep-resistant bainitic 1% CrMoV steel, in order to study the evolution of internal microstresses and load-sharing mechanisms between the ...
The combined influence of prior plastic strain in austenite and applied stress in the course of the transformation on the crystallographic texture of bainitic steel was studied. The experimental data were obtained using electron back scatter diffraction an ...
A new, more physically realistic and practically useful model is presented for the simulation of high temperature austenite flow curves. It is an extension of our earlier empirical model based on the Avrami kinetics of dynamic recrystallization. In the new ...
On application of heat, shape memory polymers (SMPs) are able to revert to a primary shape from a secondary shape induced by mechanical deformation. It may be desirable to induce shape recovery at controlled rates under quasi-isothermal conditions, e. g. i ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2012
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
The tensile properties of the high-chromium tempered martensitic reduced activation steel Eurofer97 were determined from tests carried out over a wide range of strain-rates on cylindrical specimens. The quasi-static tests were performed with a universal el ...
Polycrystalline materials with crystallite diameters below hundred nanometer exhibit extraordinary strength which goes along with a decrease in ductility. In order to tailor tough materials, which combine strength and ductility, the underlying deformation ...
The strain softening behavior of a particle-containing copper alloy and the associated microstructure changes were investigated as a function of strain rate (epsilon) over dot and analyzed by modeling. It is shown that, increasing strain rate (epsilon) ove ...
Recrystallization, which can occur dynamically or statically, is an important phenomenon causing microstructure changes in deformed metals and therefore affecting the properties of the material. Even though extensive investigations have been carried out on ...
