Deployment of a tensegrity footbridge

Deployable structures are structures that transform their shape from a compact state to an extended in-service position. Structures composed of tension elements that surround compression elements in equilibrium are called tensegrity structures. Tensegrities are good candidates for deployable structures since shape transformations occur by changing lengths of elements at low energy costs. Although the tensegrity concept was first introduced in 1948, few full-scale tensegrity-based structures have been built. Previous work has demonstrated that a tensegrity ring topology is potentially a viable system for a deployable footbridge. This paper describes a study of a near-full-scale deployable tensegrity footbridge. The study has been carried out both numerically and experimentally. The deployment of two modules (one half of the footbridge) is achieved through changing the length of five active cables. Deployment is aided by energy stored in low stiffness spring elements. Self-weight significantly influences deployment, and deployment is not reproducible using the same sequence of cable- length changes. Active control is thus required for accurate positioning of front nodes in order to complete deployment through joining both sides at center span. Additionally, testing and numerical analyses have revealed that the deployment behavior of the structure is nonlinear with respect to cable-length changes. Finally, modeling the behavior of the structure cannot be done accurately using friction-free and dimension- less joints. Similar deployable tensegrity structures of class two and higher are expected to require simulation models that include joint dimensions for accurate prediction of nodal positions. DOI: 10.1061/(ASCE)ST.1943-541X.0001260 . © 2015 American Society of Civil Engineers.

Toward development of a biomimetic tensegrity footbridge

Seif Dalil Safaei, Ian Smith, Nicolas Willy Veuve

Biomimetic structures interact with their environment, change their properties, learn and self-repair, thereby providing properties that are similar to living organisms. Interactions with the environment involve unique challenges in the field of computational control, algorithms, damage tolerance, and structural analysis. Tensegrity structures are pin-jointed structures of cables and struts in a self-stress state. Tensegrity structures are suitable for active control since the shape of the structure can be changed by changing the length of the elements. Consequently, they are good candidates for biomimetic structures. This paper describes research that is moving toward a case study of biomimetic behaviour of a deployable tensegrity footbridge. This footbridge is made of four modules. Each module is composed of pentagonal circuit-pattern including interconnected struts in a ring configuration that can be folded if cable lengths are changed. Various actuator combinations can be selected for deployment. This property is particularly interesting for biomimetic structures since a single shape change can be achieved many ways. Methodologies for deployment and folding of tensegrity footbridge via combinations of spring and cable clustered actuation are described. Analytical predictions are compared with test results of a near-full-scale tensegrity footbridge. Strategies for folding and deployment are different. A continuous cable and spring configuration is feasible for deployment of tensegrity footbridge. Since the deployment behaviour is non-linear and since deformed geometry as well as joint friction influences the deployment pattern, pre-defined control commands cannot provide the desired deployed position. Active deployment control is thus justified.

International Center for Numerical Methods in Engineering (CIMNE)2014

Joint Friction during Deployment of a Near-Full-Scale Tensegrity Footbridge

Ian Smith, Ann Christine Sychterz

Most deployable structures, such as operable roofs and masts, move over one degree of freedom. This paper describes a structure that involves loosely coupled movement over several degrees of freedom. Analysis models of these structures are typically inaccurate. A source of inaccuracy is joint friction. Static and kinetic friction are studied experimentally and analytically. Simulations have been modified to account for these effects, and two methods are used to quantify friction effects. Friction has a significant effect on the movement of the tensegrity structure. Of two candidate parameters, cable tension and interior cable angle, cable angle is the factor that best characterizes friction effects. Values of static and kinetic friction coefficients are not significantly different in this context, and this leads to a reduction in the complexity of the friction model for simulation. Including friction effects in analysis decreases the difference between simulations and tests. Lastly, strut elements of the tensegrity structure are most critically affected by friction. (C) 2017 American Society of Civil Engineers.

American Society of Civil Engineers2017

Mechanism-Based Approach for the Deployment of a Tensegrity-Ring Module

Nizar Bel Hadj Ali, René Motro, Landolf-Giosef-Anastasios Rhode-Barbarigos, Costanza Schulin, Ian Smith

Tensegrity structures are spatial systems composed of tension and compression components in a self-equilibrated prestress stable state. Although the concept is over 60 years old, few tensegrity-based structures have been used for engineering purposes. Tensegrity-ring modules are deployable modules composed of a single strut circuit that, when combined, create a hollow rope. The "hollow-rope" concept was shown to be a viable system for a tensegrity footbridge. This paper focuses on the deployment of pentagonal ring modules for a deployable footbridge application. The deployment sequence of a module is controlled by adjusting cable lengths (cable actuation). The geometric study of the deployment for a single module identified the path space allowing deployment without strut contact. Additionally, a deployment path that reduces the number of actuated cables was found. The number of actuated cables is further reduced by employing continuous cables. A first-generation prototype was used to verify both findings experimentally. The structural response during both unfolding and folding is studied numerically using the dynamic relaxation method. The deployment-analysis algorithm applies cable-length changes first to create finite mechanisms allowing deployment and then to find new equilibrium configurations. Therefore, the actuation-step size is identified as the most critical parameter for a successful deployment analysis. Finally, it is shown that the deployability of the footbridge does not affect its element sizing because stresses during deployment are lower than in-service values. DOI:10.1061/(ASCE)ST.1943-541X.0000491. (C) 2012 American Society of Civil Engineers.

2012