Numerical simulation of 3D free surface flows, with multiple incompressible immiscible phases. Applications to impulse waves

Alexandre Caboussat, Marco Picasso
Wiley-Blackwell, 2014
Article

Résumé

A numerical method for the solution to the density-dependent incompressible Navier-Stokes equations modeling the flow of N immiscible incompressible liquid phases with a free surface is proposed. It allows to model the flow of an arbitrary number of liquid phases together with an additional vacuum phase separated with a free surface. It is based on a volume-of-fluid approach involving N indicator functions (one per phase, identified by its density) that guarantees mass conservation within each phase. An additional indicator function for the whole liquid domain allows to treat boundary conditions at the interface between the liquid domain and a vacuum. The system of partial differential equations is solved by implicit operator splitting at each time step: first, transport equations are solved by a forward characteristics method on a fine Cartesian grid to predict the new location of each liquid phase; second, a generalized Stokes problem with a density-dependent viscosity is solved with a FEM on a coarser mesh of the liquid domain. A novel algorithm ensuring the maximum principle and limiting the numerical diffusion for the transport of the N phases is validated on benchmark flows. Then, we focus on a novel application and compare the numerical and physical simulations of impulse waves, that is, waves generated at the free surface of a water basin initially at rest after the impact of a denser phase. A particularly useful application in hydraulic engineering is to predict the effects of a landslide-generated impulse wave in a reservoir. Copyright (c) 2014 John Wiley & Sons, Ltd.

Official source

https://infoscience.epfl.ch/record/203974?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Alexandre Caboussat, Marco Picasso
Wiley-Blackwell, 2014
Article

Résumé

Official source

https://infoscience.epfl.ch/record/203974?ln=fr

À propos de ce résultat

Concepts associés (27)

Concepts associés

Chargement

Publications associées (120)

Publications associées

Chargement

Analysis and numerical simulation of free surface flows

Alexandre Caboussat

Mathematical and numerical aspects of free surface flows are investigated. On one hand, the mathematical analysis of some free surface flows is considered. A model problem in one space dimension is first investigated. The Burgers equation with diffusion has to be solved on a space interval with one free extremity. This extremity is unknown and moves in time. An ordinary differential equation for the position of the free extremity of the interval is added in order to close the mathematical problem. Local existence in time and uniqueness results are proved for the problem with given domain, then for the free surface problem. A priori and a posteriori error estimates are obtained for the semi-discretization in space. The stability and the convergence of an Eulerian time splitting scheme are investigated. The same methodology is then used to study free surface flows in two space dimensions. The incompressible unsteady Navier-Stokes equations with Neumann boundary conditions on the whole boundary are considered. The whole boundary is assumed to be the free surface. An additional equation is used to describe the moving domain. Local existence in time and uniqueness results are obtained. On the other hand, a model for free surface flows in two and three space dimensions is investigated. The liquid is assumed to be surrounded by a compressible gas. The incompressible unsteady Navier-Stokes equations are assumed to hold in the liquid region. A volume-of-fluid method is used to describe the motion of the liquid domain. The velocity in the gas is disregarded and the pressure is computed by the ideal gas law in each gas bubble trapped by the liquid. A numbering algorithm is presented to recognize the bubbles of gas. Gas pressure is applied as a normal force on the liquid-gas interface. Surface tension effects are also taken into account for the simulation of bubbles or droplets flows. A method for the computation of the curvature is presented. Convergence and accuracy of the approximation of the curvature are discussed. A time splitting scheme is used to decouple the various physical phenomena. Numerical simulations are made in the frame of mould filling to show that the influence of gas on the free surface cannot be neglected. Curvature-driven flows are also considered.

EPFL2004

Chargement

Modélisation, analyse mathématique et simulation numérique de la dynamique des glaciers

Guillaume Jouvet

We address the free boundary problem that consists in finding the shape of a three dimensional glacier over a given period and under given climatic conditions. Glacier surface moves by sliding, internal shear and external exchange of mass. Ice is modelled as a non Newtonian fluid. Given the shape of the glacier, the velocity of ice is obtained by solving a stationary non-linear Stokes problem with a sliding law along the bedrock-ice interface. The shape of the glacier is updated by computing a Volume Of Fluid (VOF) function, which satisfies a transport equation. Climatic effects (accumulation and ablation of ice) are taken into account in the source term of this equation. A decoupling algorithm with a two-grid method allows the velocity of ice and the VOF to be computed using different numerical techniques, such that a Finite Element Method (FEM) and a characteristics method. On a theoretical level, we prove the well-posedness of the non-linear Stokes problem. A priori estimates for the convergence of the FEM are established by using a quasi-norm technique. Eventually, convergence of the linearisation schemes, such that a fixed point method and a Newton method, is proved. Several applications demonstrate the potential of the numerical method to simulate the motion of a glacier during a long period. The first one consists in the simulation of Rhone et Aletsch glacier from 1880 to 2100 by using climatic data provided by glaciologists. The glacier reconstructions over the last 120 years are validated against measurements. Afterwards, several different climatic scenarios are investigated in order to predict the shape the glaciers until 2100. A dramatic retreat during the 21st century is anticipated for both glaciers. The second application is an inverse problem. It aims to find a climate parametrization allowing a glacier to fit some of its moraines. Two other aspects of glaciology are also addressed in this thesis. The first one consists in modeling and in simulating ice collapse during the calving process. The previous ice flow model is supplemented by a Damage variable which describes the presence of micro crack in ice. An additional numerical scheme allows the Damage field to be solved and a two dimensional simulation of calving to be performed. The second problem aims to prove the existence of stationary ice sheet when considering shallow ice model and a simplified geometry. Numerical investigation confirms the theoretical result and shows physical properties of the solution.

EPFL2010

Chargement

This thesis addresses the development and implementation of efficient and parallel algorithms for the numerical simulation of Fluid-Structure Interaction (FSI) problems in hemodynamics. Indeed, hemodynamic conditions in large arteries are significantly affected by the interaction of the pulsatile blood flow with the arterial wall. The simulation of fluid-structure interaction problems requires the approximation of a coupled system of Partial Differential Equations (PDEs) and the set up of efficient numerical solution strategies. Blood is modeled as an incompressible Newtonian fluid whose dynamics is governed by the Navier-Stokes equations. Different constituive models are used to describe the mechanical response of the arterial wall; specifically, we rely on hyperelastic isotropic and anistotropic material laws. The finite element method is used for the space discretization of both the fluid and structure problems. In particular, for the Navier-Stokes equations we consider a semi-discrete formulation based on the Variational Multiscale (VMS) method. Among a wide range of possible solution strategies for the FSI problem, here we focus on strongly coupled monolithic approaches wherein the nonlinearities are treated in a fully implicit mode. To cope with the high computational complexity of the three dimensional FSI problem, a parallel solution framework is often mandatory. To this end, we develop a new block parallel preconditioner for the coupled linearized FSI system obtained after space and time discretization. The proposed preconditioner, named FaCSI, exploits the factorized form of the FSI Jacobian matrix, the use of static condensation to formally eliminate the interface degrees of freedom of the fluid equations, and the use of a SIMPLE preconditioner for unsteady Navier-Stokes equations. In FSI problems, the different resolution requirements in the fluid and structure physical domains, as well as the presence of complex interface geometries make the use of matching fluid and structure meshes problematic. In such situations, it is much simpler to deal with discretizations that are nonconforming at the interface, provided however that the matching conditions at the interface are properly fulfilled. In this thesis we develop a novel interpolation-based method, named INTERNODES, for numerically solving partial differential equations by Galerkin methods on computational domains that are split into two (or several) subdomains featuring nonconforming interfaces. By this we mean that either a priori independent grids and/or local polynomial degrees are used to discretize each subdomain. INTERNODES can be regarded as an alternative to the mortar element method: it combines the accuracy of the latter with the easiness of implementation in a numerical code. The aforementioned techniques have been applied for the numerical simulation of large-scale fluid-structure interaction problems in the context of biomechanics. The parallel algorithms developed showed scalability up to thousands of cores utilized on high performance computing machines.

EPFL2016

Chargement

Analysis and numerical simulation of free surface flows

Alexandre Caboussat

EPFL2004

Modélisation, analyse mathématique et simulation numérique de la dynamique des glaciers

Guillaume Jouvet

EPFL2010

EPFL2016