Tensile tests on optical fibre cables using distributed Brillouin analysis
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 μm were manipulated with an atomic force microscopy tip ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
The microstructure and tensile behavior of pure single crystalline Ni irradiated to low doses at room temperature with 590 MeV protons are investigated. Tensile tests performed at room temperature show radiation induced hardening, which increases with incr ...
Mechanical and fracture behaviors of wood are defined by the morphology and mechanical properties of wood fibers and their bonding medium. Parallel orientation of wood fibers makes them the most influential microstructural elements from the mechanical poin ...
A microstructural analysis and tensile tests were performed on two oxide dispersion strengthened ferritic/martensitic steels. Dispersion hardening represents an interesting approach to improve the mechanical properties at elevated temperatures, as they are ...
The microstructure and tensile behavior of pure single crystalline Ni irradiated with 590 MeV protons are investigated. First results have been obtained for a damage level of 0.13 dpa at room temperature and 0.002 dpa at 523 K. The irradiation induced defe ...
We have reinforced alpha-Ti with different contents of TiC particles using the in situ technique and conventional casting. Compositional and microstructural characterization of the TiC/Ti composite material was made by XRD and SEMEDS. Tensile tests at RT, ...
The differences and similarities of behaviour between fee and bcc metals after irradiation have been investigated. For this purpose, fee Cu, Pd and 304 stainless steel and bcc Fe, Mo and Mo-5% Re were irradiated with either neutrons or 590 MeV protons at t ...
The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...
