Impact of the supplementary cementitious materials on the kinetics and microstructural development of cement hydration
Publications associées (113)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
H-1 nuclear magnetic resonance (NMR), supported by a measurement of the degree of hydration using X-ray diffraction, has been used to fully characterise the nano-scale porosity and composition of calcium-silicate-hydrate (C-S-H), the active component of ce ...
This paper describes a macroscopic model of the chemo-thermo-poromechanical behaviour of a hydrating cement paste. The hydrating cement is viewed as an open hardening porous medium. The increments of elastic and viscoelastic strain, pore pressure, temperat ...
The nanoscale morphology of, and pore water interactions in, calcium silicate hydrate (C-S-H), the active component of cement, remain uncertain. H-1 nuclear magnetic resonance (NMR) can fully characterize the nanoporosity of C-S-H in as-prepared material w ...
This paper focuses on the interactions that occur between cement phases during early hydration, especially between the hydration of alite and C(3)A-gypsum. This study shows that alite reaction is accelerated in the presence of gypsum. This acceleration was ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement ...
The setting of Roman cement is so rapid as to make the use of retardation essential in most practical mortars. This work reports an approach to retardation of Roman cement mortars by means of a pre-hydration process in which pre-determined amounts of water ...
Addition of fine limestone provides an excellent means to reduce the amount of clinker in cement. It is now well accepted that limestone partially reacts in cementitious systems with C3A to produce hemi- and monocarboaluminate phases and as a consequence m ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Alkali silica reaction (ASR) is a long-term reaction between certain aggregates containing amorphous silicate phases and the alkalis from the cement paste. These silicates react with the alkalis present in the pore solution of the cement paste and form an ...