Tetradymites as Natural Hyperbolic Materials for the Near-Infrared to Visible

Hyperbolic media exhibit unparalleld properties, e.g, as light absorbers in photovoltaics and photonics, as superlenses in far-field imaging, as subwavelength light concentrators in nanolithography, or as novel materials in emission engineering. With the advent of optical metamaterials, deliberate design of material properties became possible. However, inadvertent variability in fabrication techniques and other factors limit performance characteristics of man-made hyperbolic materials. Here, we draw attention to a class of natural hyperbolic materials, the tetradymites. From generalized spectroscopic ellipsometry we extract the dielectric tensor components and find hyperbolic behavior in Bi2Se3 and Bi2Te3 in the near-infrared to visible spectrum. Previously, natural hyperbolic media were known only in the far-infrared spectral range. As possible applications of tetradymites we discuss superlenses for near-field microscopy and far-field isoindex filters. Solid solutions of tetradymites are likely tunable in operational wavelength from the infrared to the visible, complementing hyperbolic metamaterials.

Developing luminescent Brownian probes for near-field investigations of the intracellular environment

Flavio Maurizio Mor

Life sciences have a constantly growing need for novel methodological approaches suitable to investigate the intracellular environment with increased temporal and spatial resolutions. Recently, optical near-field probes, such as laser-irradiated pointed metal, uncoated/metal-coated tapered optical fibers, as well as nano-emitters, such as single molecules or nanoparticles, have attracted increasing attention as key components of high-resolution microscopes. In parallel, super-resolution fluorescence microscopy, operating in far-field regime and overcoming the light diffraction limit, has markedly improved imaging resolution. Although both near- and far-field optical approaches drastically improve image resolution, they still represent numerous drawbacks, such as, technical difficulties concerning probe preparation (near-field) or potential damaging through very high light intensities (far-field). The aforementioned shortcomings of high-resolution optical microscopy can be overcome to a great extent by photonic force microscopy (PFM). PFM employs a strongly focused near-infrared (NIR) laser light to hold a dielectric or metallic particle as a local probe. Such an optical trap enables one to ‘cage’ a mesoscopic particle and track its three-dimensional (3D) thermal fluctuations in the surrounding environment, e.g. a viscous liquid. Therefore, besides offering near-field 3D imaging, PFM reports also on other important quantities concerning local mechanical properties, including force and viscosity as well as dynamical properties of the surrounding medium. This additional information is derived from the careful analysis of the jittery motion (so-called Brownian motion) of the trapped single-particle probe that collides with thermally-activated surrounding molecules. In this thesis, we first study in detail the Brownian motion of a single spherical particle that is confined within the harmonic potential of the optical trap. To this end, we optimize the NIR light path and electronic noise floor of our custom-built PFM set-up for detecting and quantifying resonances in the Brownian motion. These resonances arise from the coupling between the hydrodynamic memory and strong strength of the optical trap. Due to the high sensitivity of the short-time dynamics, the size of the particle can be measured by simultaneous fitting of the velocity autocorrelation function and power spectral density of its thermal fluctuations. In order to choose the best-suitable spherical probe for a given experiment in PFM, computational modeling based on a Matlab toolbox is performed. The generalized Lorenz-Mie theory is computed using the T -matrix method for various experimental conditions, including changes in the size and refractive index of the sphere, as well as different laser polarization states. The axial equilibrium position is examined to predict its location compared with the position of the laser focus. Optical forces acting on the sphere are investigated in 3D to highlight, in particular, the limits of the perfectly harmonic potential assumption. These limits are quantified and discussed. Subsequently, we identify different types of inorganic nano/micro-sized particles that can be trapped by the NIR laser of the PFM and used simultaneously as mechanical and near-field light sources. To this end, we take advantage of the visible light emission from single probes confined in the optical trap and excited by the NIR laser light. The emphasis is on particles revealing nonlinear optical properties. In particular, nonlinear optical field enhancement resulting from excitation of surface plasmon resonance (SPR) on trapped gold particles of 200 nm is demonstrated by measuring the emission of that second-harmonic generation (SHG). Furthermore, we show, under optical trapping conditions, SHG emission from single potassium niobate (KNbO3) nano/micro-sized particles. We also report on the multicolor upconversion luminescence (UCL), at the single particle level, for randomly shaped crystals of sodium yttrium fluoride codoped with ytterbium and erbium, NaYF4:Yb,Er (UCC), when they are held in the optical trap. In parallel, 3D Brownian fluctuations of a single trapped particle are quantified. Moreover, luminescence resonance energy transfer (LRET) between a KNbO3 particle or an UCC and molecules of an organic dye (rose bengal) adsorbed on their surface is highlighted and analyzed. Finally, randomly shaped UCCs and hexagonal nanoplates are characterized in detail at the single particle level. The hexagonal β phase in the polycrystalline and monocrystalline crystals is identified, in both randomly and hexagonally shaped particles by electron microscopy. UCL emission from the trapped crystal is quantified in terms of power and found to be dependent on the laser power density, size and shape of the particle as well as its orientation within the trap. Most importantly, the different colors in the UCL spectrum do not vary with the same trend for different orientations of the randomly or hexagonally shaped crystal upon trapping. This suggests the existence of crystalline anisotropy-dependent UCL. Thereby, we should be able to design the best-suited particle probe for LRET experiments with subwavelength resolution.

EPFL2013

Chemically resolved imaging of biological cells and thin films by infrared scanning near-field optical microscopy

Giorgio Margaritondo

The infrared (IR) absorption of a biological system can potentially report on fundamentally important microchemical properties. For example, molecular IR profiles are known to change during increases in metabolic flux, protein phosphorylation, or proteolytic cleavage. However, practical implementation of intracellular IR imaging has been problematic because the diffraction limit of conventional infrared microscopy results in low spatial resolution. We have overcome this limitation by using an IR spectroscopic version of scanning near-field optical microscopy (SNOM), in conjunction with a tunable free-electron laser source. The results presented here clearly reveal different chemical constituents in thin films and biological cells. The space distribution of specific chemical species was obtained by taking SNOM images at IR wavelengths ( l) corresponding to stretch absorption bands of common biochemical bonds, such as the amide bond. In our SNOM implementation, this chemical sensitivity is combined with a lateral resolution of 0.1 mum (approximate tolambda1/70), well below the diffraction limit of standard infrared microscopy. The potential applications of this approach touch virtually every aspect of the life sciences and medical research, as well as problems in materials science, chemistry, physics, and environmental research.

2003

High coupling materials for thin film bulk acoustic wave resonators

Janine Conde

Radio frequency (RF) filters based on bulk acoustic wave resonances in piezoelectric thin films have become indispensable components in mobile communications. The currently used material, AlN, exhibits many excellent properties for this purpose. However, its bandwidth is often a limiting factor. In addition, no tuning is possible with AlN. Ferroelectrics would offer both larger coupling to achieve larger bandwidths, and tunability. However, their acoustic properties are not well known, especially in the thin film case. The goal of this thesis is to investigate the potential and identify the limitations of ferroelectric thin films for thickness mode resonators in the 0.5 - 2 GHz range. The Pb(Zrx,Ti1-x)O3 (PZT) solid solution system is the main candidate, since it is known for its large piezoelectric constants and its growth is already well studied. As a main test vehicle, free standing thin film bulk acoustic resonator (TFBAR) structures with Pt/PZT/Pt/SiO2 membranes were successfully fabricated using silicon micro-machining techniques. The main drawback of ferroelectrics is the damping of acoustic waves by domain wall motion both in the RF electric field and in the pressure wave. For this reason films with varying orientations and compositions were investigated. From the device structures the electro-mechanical coupling constants kt2, the quality factors (Q-factors) and several materials parameters have been obtained. High coupling constants have been found for sol-gel Pb(Zr0.53,Ti0.47)O3 films with a {100} texture, kt2 is found to be 0.4 for a 1 µm thick film and 0.8 for a 3.8 µm thick film. However, the Q-factors of these films are low, 18 for the first film and 3 for the second film. The increase of kt2 and the decrease of the Q-factor with frequency indicates that the domains present in these films contribute to these characteristic parameters. It was generally observed that high coupling constant are associated to low Q-factors. This became evident when comparing films with 53/47 composition, where both tetragonal and rhombohedral phases are present, to tetragonal films as well as when comparing {100} textures with (111) textures. Both for the 53/47 composition and for the {100} texture, ferroelastic domain walls are thought to play a bigger role than for tetragonal compositions and (111) textures. The highest figure of merit (FOM) of about 15 was found when combining the composition leading to a high coupling constant (53/47) and the orientation leading to lower losses (111). However the losses even in this film are too high for RF-filter applications. On the other hand, films with low Q-factors but high coupling could prove very useful as transducers for ultrasonic imaging applications, where low Q-factors are desired. The stiffness coefficients of the studied PZT films were shown to be higher than expected from ceramics data. Most likely the stiffness of ceramics always contains domain contributions leading to softening. In contrast, in textured films the variety of domain orientation is very much reduced. In order to reduce losses due the presence of ferroelastic domains three different potential solutions were explored. The first idea was to manipulate the domain populations of the films deposited on silicon by using heat and vacuum treatments. Silicon substrates are known from previous works to be unfavourable for high c-domain fractions. It was discovered that an anneal in vacuum at 550 °C lead to a significant reduction of c-domains in tetragonal 30/70 PZT ({100}). On the contrary, if the sample was subjected to a compressive stress during cooling, the c-domain fraction could be increased. Analysis of the film stress versus temperature curves revealed a trend consistent with theoretical predictions, i.e. a phase boundary between the c/a/c/a and the a1/a2/a1/a2 domain patterns between room temperature and the Curie temperature θC. However, even though this method reveals interesting results, it can not be exploited as a method to achieve a sufficient c-domain population. The second idea explored was the implementation of a high thermal expansion material as a substrate. PZT films deposited on MgO are known to be compressive due to the difference in thermal expansion of the two materials. The compressive stress leads to highly c-axis oriented PZT films. Devices using MgO substrates were fabricated, however difficulties in the micro-machining of the MgO substrate inhibited a complete liberation of the membrane. Nevertheless, preliminary measurements indicate these devices could lead to both high coupling and high Q-factors, suggesting that further detailed study of this method is worthwhile. As a third method for avoiding ferroelastic domains, the uniaxial ferroelectric potassium lithium niobate (KLN) was explored. The unique ferroelectric axis in this material means that only 180° domain walls are present, which can theoretically be removed by poling. This material has been deposited in thin film form using pulsed laser deposition (PLD). KLN thin films with a {001} texture were deposited successfully on Pt/Si substrates. The films were piezoelectric with a d33,f value of around 10 pm/V and a dielectric constant of 250. This is the first time that piezoelectric properties were measured on KLN thin films. A columnar structure has been observed, however the small grain size and the rough surface currently make it difficult to apply this material to TFBAR's.