Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
The attachment of the first wall modules of the ITER FEAT fusion reactor is designed using flexible connectors made from titanium alloys. An assessment of the tensile and fatigue performance of two candidate alloys, a classical two phase Ti6Al4V alloy and ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Dislocation velocities and mobilities are studied using molecular dynamics simulations for edge and screw dislocations in pure aluminium and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg random substitutional alloys using EAM potentials. In the ...
We have investigated the influence of strain on the morphology in metal heteroepitaxy at temperatures where growth is dominated by kinetics. Whereas Ag(111) homoepitaxy is three dimensional below 400 K, the growth of Ag On Pt(111) proceeds two dimensionall ...
Two tensile-strained GaxIn1-xP / InP (001) heterostructures (with x = 6.5% and x = 11.2%) have been studied by TEM and cathodoluminescence. In both structures stacking faults and twins, located in the epilayer, have been found preferably along the [(1) ove ...
Raman microscopy is applied to a gel-spun UHMWPE-fibre (Dyneema SK60) to determine the distribution of axial molecular stresses and their change with time (in creep and during stress relaxation). A more detailed method is proposed to quantify the observed ...
Single crystal copper was irradiated with 590 MeV protons to a dose of 0.01 dpa at room temperature. Irradiated and unirradiated tensile samples were deformed and relaxation tests were performed at temperatures between 77 and 293 K. The tests show a strong ...
Single-crystal nickel was irradiated with 590 MeV protons to 10(-1) dpa at room temperature. Irradiated and unirradiated tensile samples were deformed and relaxation tests were performed at temperatures between 77 and 423 K. The tests show a strong tempera ...
A set of constitutive equations describing the plasticity of semiconductors is compared with the results of mechanical tests. Constant strain-rate compression tests are interrupted before the peak of the initial multiplication yield point, i.e. at the mome ...
