Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Metal mirrors will be implemented in about half of the ITER diagnostics. Mirrors in ITER will have to withstand radiation loads, erosion by charge-exchange neutrals, deposition of impurities, particle implantation and neutron irradiation. It is believed th ...
The Joint European Torus (JET) has recently operated with deuterium-tritium (DT) mixtures, carried out an International Thermonuclear Experimental Reactor (ITER) physics campaign in hydrogen, deuterium, DT and tritium, installed the Mark IIGB 'Gas Box' div ...
Transport phenomena in tokamak plasmas strongly limit the particle and energy confinement and represent a crucial obstacle to controlled thermonuclear fusion. Within the vast framework of transport studies, three topics have been tackled in the present the ...
Experiments are conducted on JET to assess the potential for plasma diagnostic spectroscopy and mode stability control, of Alfven eigenmodes (AEs), excited by external antennas and by energetic particles. Information on the time evolution of the nonmonoton ...
Different models have been introduced in the stability code MARS-F in order to study the damping effect on resistive wall modes (RWM) in rotating plasmas. Benchmarks of MARS-F calculations with RWM experiments on JET and DIII-D indicate that the semi-kinet ...
The ITER ECRH upper port antenna (or launcher) will be used to drive current locally for stabilising the neoclassical tearing mode (NTM)) by depositing mm-wave power inside of the island which forms on the q=3/2 or 2 rational magnetic flux surfaces and con ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007
Active control of the resistive wall mode has been considered as an alternative way, besides passive control by plasma rotation, to stabilize the mode in advanced scenarios in ITER. We show that a significant improvement of the feedback system is achievabl ...
The development of linear model of the present JET (Joint European Torus) electromagnetic system has allowed the design of an optimized Plasma Shape Controller. Quite extreme plasma boundaries (elongation k = 1.9 and triangularity = 0.6) are shown ...
The ITER toroidal field model coil (TFMC) was designed, constructed and tested by the European Home Team in the framework of the ITER research and development program of the Engineering Design Activities (EDA). The project was performed under the leadershi ...
The polarimeter system for ITER features 10 viewing chords covering almost the full poloidal cross section of the plasma in a fan-like arrangement. The 10 laser beams all enter the plasma via 150 mm diam penetrations through the diagnostic plug at the low- ...
