Investigation of microstructure and mechanical properties of W-Y and W-Y2O3 materials fabricated by powder metallurgy method
Publications associées (32)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
The mechanical behaviour of metallic materials that have a microstructure composed of a brittle phase embedded in a ductile matrix is dictated by a complex interplay of factors such as local phase properties, cohesive properties, geometrical characteristic ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
The present study shows the influence of severe plastic deformation on highly stable Y-Ti-O nano-oxides present in ferritic ODS alloys used for nuclear applications. An innovative strain path implying alternated compressions was used to deform the material ...
The mechanism of the capacity degradation of LaNi5-based alloy electrodes was investigated with a special focus on the influence of the alloy and surface composition, as well as the unique structure obtained by gas atomisation. The electrochemical properti ...
The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys with different initial amounts of Mn (0.4 and 1.0. wt%) is studied. In addition to their as-cast conditions, the supersaturated Al-Mn-Fe-Si alloys were appropr ...
An oxide dispersion strengthened ODS ferritic steel has been produced by mechanical alloying of Fe–14Cr–2W–0.2Ti (wt.%) prealloyed powder with 0.55 (wt.%) Fe2Y intermetallic particles and consolidated by hot isostatic pressing. The microstructure after the ...
The influence of microchemistry on the softening behaviour of two cold-rolled Al–Mn–Fe–Si alloys with different initial amounts of Mn (0.4 and 1.0 wt%) is studied. In addition to their as-cast conditions, the supersaturated Al–Mn–Fe-Si alloys were appropri ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
The Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS) reduced activation ferritic (RAF) steel was fabricated by mechanical alloying of a pre-alloyed, gas atomised powder with yttria nano-particles, followed by hot isostatic pressing and ther ...