Reactive friction stir processing of AA 5052-TiO2 nanocomposite: process-microstructure-mechanical characteristics
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The fracture strength of silicon nanowires grown on a [111] silicon substrate by the vapor-liquid-solid process was measured. The nanowires, with diameters between 100 and 200 nm and a typical length of 2 μm, were subjected to bending tests using an atomic ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...
The mechanisms of deformation and failure in Al-Si nanocomposites, formed by adding Si particles to Al nanocrystalline materials, are investigated using molecular dynamics. The deformation and fracture mechanisms are found to be different in the Al-Si comp ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
A two-dimensional finite element model is developed to investigate intergranular fracture in alumina under compression. The grain interiors are modeled as anisottopic elastic and the properties of the grain boundaries are fitted from experimental data. Mat ...
This paper describes new polymer/ceramic photosensitive resins that can be used in the microstereolithography process for manufacturing complex 3D components in composite material. These new resins contain high loads (up to 80 wt.%) of alumina nanoparticle ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
This work contributes to the fundamental understanding of fracture properties of Particle Reinforced Metal Matrix Composites (PRMMCs), by identifying the key microstructural parameters that control fracture. To this end, PRMMCs with a high volume fraction ...
Molecular statics simulations of crack growth in fully lamellar Ti-Al are performed to elucidate the role of lamellar structure in determining deformation and fracture toughness in nanoscale structures. The lamellar boundaries are highly effective in inhib ...
