Precipitation in the high strength AA7449 aluminium alloy
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
In this paper, an elastic plastic behaviour model based on internal state variables is investigated. The final aim is to describe the mechanical stress-strain cyclic response of oxide dispersion strengthened (ODS) steels during the cold pilgering process. ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
The rigid body motion of the workpieces and their elastic-plastic deformations induced during high speed milling of thin-walled parts are the main root causes of part geometrical and dimensional variabilities; these are governed mainly from the choice of p ...
Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...
The mechanical behaviour of nanocrystalline austenitic steels with and without yttria particles was investigated using in situ synchrotron diffraction during tensile deformation. Two different strain-hardening regimes were found. The first regime can be as ...
Axial compression experiments were conducted on pultruded E-glass fiber-reinforced polymer laminates of different slenderness. Second-order deformations greatly increased the bending moments and shear forces of slender specimens. Delamination failure occur ...
Ultra High Performance Fiber Reinforced Concretes (UHPFRC) present outstanding mechanical properties and a very low permeability. Those characteristics make them very attractive for the rehabilitation of existing structures and the conception of new struct ...
