Direct-write diffracting tubular optical components using femtosecond lasers
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper reports on the mechanical properties of fused silica flexures manufactured by a two-step process combining femtosecond lasers exposure below the ablation threshold and chemical etching. Flexural strengths as high as 2.7 GPa were measured, demons ...
By continuously scanning a femtosecond laser beam across a fused silica specimen, we demonstrate the formation of self-organized bubbles buried in the material. Rather than using high intensity pulses and high numerical aperture to induce explosions in the ...
We experimentally demonstrate that temporal differentiation of optical pulses can be realized in a slow & fast light system based on a resonance. The waveform of a 13 ns Gaussian pulse was experimentally first-order differentiated. ...
We show the first results of a linear 100-micromirror array capable of modulating the phase and amplitude of the spectral components of femtosecond lasers. Using MEMS-based reflective systems has the advantage of utilizing coatings tailored to the laser wa ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2010
We measure the lasing dynamics of single and coupled photonic crystal nanocavity array lasers fabricated in the indium gallium arsenide phosphide material system. Under short optical excitation, single cavity lasers produce pulses as fast as 11 ps (full wi ...
Several applications are pushing the development of high performance mode-locked lasers: generation of short pulses for extremely high bit rate transmission at 100 Gb/s and beyond, all-optical clock recovery at 40 Gb/s and beyond, generation of millimeter ...
A two step process has been developed for the fabrication of diffraction limited concave microlens arrays. The process is based on the photoresist filling of melted holes obtained by a preliminary photolithography step. The quality of these microlenses has ...
The use of low-energy femtosecond laser beam combined with chemical etching has been proven to be an efficient method to fabricate three-dimensional structures in fused silica. For high-volume application, this technology – like other serial processes – su ...
