Continuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)

Over the last years a new type of tubular plug flow reactor, the segmented flow tubular reactor (SFTR), has proven its versatility and robustness through the water-based synthesis of precipitates as varied as CaCO3, BaTiO3, Mn((1-x))Ni(x)C(2)O(4)2H(2)O, YBa oxalates, copper oxalate, ZnS, ZnO, iron oxides, and TiO2 produced with a high powder quality (phase composition, particle size, and shape) and high reproducibility. The SFTR has been developed to overcome the classical problems of powder production scale-up from batch processes, which are mainly linked with mass and heat transfer. Recently, the SFTR concept has been further developed and applied for the synthesis of metals, metal oxides, and salts in form of nano- or micro-particles in organic solvents. This has been done by increasing the working temperature and modifying the particle carrying solvent. In this paper we summarize the experimental results for four materials prepared according to the polyol synthesis route combined with the SFTR. CeO2, Ni, Ag, and Ca-3(PO4)(2) nanoparticles (NPs) can be obtained with a production rate of about 1-10 g per h. The production was carried out for several hours with constant product quality. These findings further corroborate the reliability and versatility of the SFTR for high throughput powder production.

Process monitoring of alumina nanoparticle synthesis by inductively coupled RF thermal plasma

Jong-Won Shin

Since the first inductively coupled plasma (ICP) torch was developed in the 60's, RF thermal plasmas have found a variety of applications in material processing such as crystal growth, thermal spray coatings, spheroidization and vaporization of refractory materials. In recent decades, inductively coupled thermal plasmas have been used for the synthesis of high purity nanoparticles, thank to their remarkable advantages such as high energy density, variable operating pressures and low product contamination. The formation of nano-sized particles in thermal plasmas particularly using solid refractory precursor is a complex process. Hereby the injected precursor powders are heated by the high temperature of the thermal plasma. The heated powders are vaporized and decomposed into vapor species. During the following cooling, the vapor species are condensed to nano-sized particles. In this synthesis process, characterized by evaporation-condensation, the properties of the synthesized particles such as particle size, size distribution, phases and morphology are affected by various process parameters. Gas pressure, flow rates of the different torch gases, size of the precursor powders and powder loading in the plasma are considered as the influencing process parameters. In order to optimize and control the process for tailor-made nanoparticle synthesis, it is necessary to understand the effects of the process parameters on plasma properties and on the particle-plasma interactions resulting in final properties of the synthesized powders. In the present work, firstly, the enthalpy probe technique, a well-established plasma diagnostic tool for high pressure thermal plasma, has been applied to characterize the inductively coupled Ar-H2 thermal RF plasma used for alumina nanoparticle synthesis at different operating conditions. The plasma enthalpy has been determined, and the plasma temperature under a given gas pressure could subsequently be calculated assuming local thermodynamic equilibrium (LTE), once the gas composition has been determined by mass spectrometry. The gas velocity of the plasma jet could also be obtained by using the Bernoulli equation and stagnation pressure. Secondly, the influence of flow rates of central gas and precursor feed rates on the Al2O3 precursor evaporation has been investigated by process monitoring. Optical emission spectroscopy (OES) and laser light extinction (LE) measurements have been carried out to monitor in-situ the injection of the alumina precursors and to obtain information on the ongoing precursor evaporation. The emission line intensities of the aluminum vapor were used to determine the dependence of process parameters on precursor evaporation. Furthermore, the laser light extinction was used to calculate the number density of non plasma-treated powders, from which the number fraction of evaporated powders could be deduced. The size and morphology of the synthesized particles have been characterized ex-situ. Finally, the influence of quenching conditions on the condensation and formation of the nano-sized alumina particle has been studied by process analysis of the gas phase reactions of alumina. Optical emission spectroscopic was performed at different axial positions to monitor the gas phase reactions of the vaporized particles. Axial profiles of the emission line intensities of the main vapor species of alumina, Al(g) and AlO(g), were compared with the results of the enthalpy probe measurements and the thermal decomposition reactions of alumina found in literature. The results allow explanation of the alumina reactions in the thermal plasma as well as gives indications for the optimal axial position of the quenching gas injection. In addition to the determination of the optimal quenching position, the influence of the flow rates of quenching gas on the nanoparticle formation has been investigated. The synthesis of the submicron alumina using vapor-condensation principle predominantly leads to various thermodynamically metastable crystal structures called transition alumina. Therefore, the occurrence of different transition aluminas is discussed with regards to the flow rates of the quenching gas. The results presented in this thesis show that the synthesis process of the nanoparticle can be described on the basis of experimental results and basic information on the powder materials. The explanation of the influence of process parameters on powder evaporation and nanoparticle formation shows the usefulness of the in-situ plasma process monitoring, and the large potential for optimizing and controlling the nanopowder synthesis process in an inductively coupled RF thermal plasma.

EPFL2006

On the relationship between the microstructure and the mechanical properties of an ODS ferritic/martensitic steel

Amuthan Ramar

In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported by a good thermal conductivity, swelling resistance and low radiation damage accumulation of the base material, such as EUROFER97, are further enhanced by the presence of a fine dispersion of nanometric oxide particles. They would allow in principle for a higher operating temperature of the fusion reactor, above 550°C, which improves its thermal efficiency. In effect, their strength remains higher than the base material at high temperatures. There are however limitations to their application in the reactor, which relate to the intimate link between the microstructure and the mechanical properties. These limitations, such as an increased ductile to brittle transition temperature above room temperature relative to the base material, come directly from the role played by the oxide particles but also from their indirect impact on the overall microstructure, stemming from the procedure of elaboration of these materials. In addition, there is a lack of knowledge on their response to irradiation, which, even though it appears to be promising with a reduced irradiation induced hardening, is not very well understood. In this work we have developed and evaluated ferritic/martensitic steel, EUROFER97, strengthened by a dispersion of yttria particles. (1) The powder metallurgical process used to obtain it was optimized, (2) the basic mechanisms of hardening were identified and (3) the impact of irradiation on its microstructure and mechanical properties were investigated. In order to understand the behaviour of this class of material other oxide dispersion strengthened (ODS) ferritic/martensitic steels based on EUROFER97 and model alloys were also investigated. For the elaboration of the ODS steel the powders of atomized EUROFER97 and yttria are ball milled in a planetary ball mill and the material is compacted by hot isostatic pressing (HIP). The mechanical properties are evaluated by uniaxial tensile test, Charpy test and micro-indentation while the microstructure is investigated by optical microscopy, scanning electron microscopy and transmission electron microscopy. The focused ion beam (FIB) technique is also used. In the study of the ball milling it appears that the optimal time is 20 hours, as the X-ray peak broadening, crystallite size and hardness of the particles remain unchanged at longer times. Yttria nanoparticles clusters are no more detectable by X-ray after 2 hrs of milling, which is attributed here to their incorporation in the matrix, as opposed to dissolution in the matrix as is often suggested in the open literature. HR-TEM performed on the yttria particles before and after incorporation in the steel by ball milling shows that the yttria maintain its bcc equilibrium structure throughout the process. This could suggest that they are not dissolved during ball milling. We have clarified this point by a cross sectional examination of the EUROFER97 ball milled particles with 0.3wt% of yttria in an FIB. By X-ray EDS analysis it shows nanometric regions reach in yttrium and oxygen, which are the yttria particles embedded in the EUROFER97 particles, proving that they are not dissolved by ball milling. The mechanism at the origin of the alloy compaction during HIP was elaborated. The alloy compaction was done through HIPing at 1150°C for 2.5 hrs at a pressure of 190 MPa. This condition is shown to provide the highest bulk density, to a value close to 99.9%. In the optimization process, it is found that temperature plays a larger role than pressure for alloy compaction. The compaction appears to be mainly due to diffusion. Also, it appears that the ball milled particle size plays a major role in the alloy compaction. It is shown that smaller particles size induces better compaction, provided that the densification proceeds through diffusion flow. This further suggests to terminate the ball milling process by 20 hrs as the particles size reaches its minimum. The impact of the ball milling process on the mechanical properties was evaluated. EUROFER97 with and without ball milling, with and without oxide addition presents an average density around 99.8%. In the as received state, casted EUROFER97, atomized EUROFER97, ball milled EUROFER97 and ODS Yttria present microstructure morphology typical of tempered martensite, whereas ODS Ti presents a nano sized grain microstructure with an average grain size of 200 nm. Ball milling and HIPping does have a slight influence up to 400°C, due to the higher dislocation density induced by ball milling relative to casted EUROFER97. It becomes negligible above 400°C, since both casted and ball milled EUROFER97 present similar hardness and microstructure. In ODS Yttria, yttria presents an average particle size of 25 nm. In ODS Ti, Y-Ti-O presents an average particle size of 7 nm. In the following the identification of the hardening mechanisms in ODS F/M steels. A new model was developed to quantify the collective hardening due to different obstacles, assuming that they provide independent hardening mechanisms. The model helped identifying the dominating source of hardening in ODS F/M steels. The base of the model is the dispersion barrier strengthening model, which is given by Δσsparticle or defects = Mαμb(Nd)1/2 for the hardening due small defects or oxide particles and is given by Δσd-d = Mαμb(ρ)1/2 for the hardening due to dislocations. In this approximation, the total hardening is then given by Δσtotal = {(Δσd-d)2 + (Δσparticle or defects)2}1/2 . The model is used to explain the hardening due to oxides, dislocations and irradiation induced defects. It appears that dispersed oxides is dominating hardness up to 800°C, while following a heat treatment at 1000°C it is the dislocations that then dominate the hardness. Deformation mechanisms were investigated using differential strain rate experiments. The activation parameters, i.e. the activation volume and activation energy, were calculated. It appears that there is a decrease in the activation volume from room temperature to 400°C, which is less than 3%. At about 500°C there is a sudden drop in the activation volume that reaches a minimum at 600°C. With further increase in temperature, there is a significant raise in the activation volume. This abrupt decrease between 400°C and 600°C hints at a change in dislocation-rate controlling mechanism, marking two regimes, a low temperature one and a high temperature one. In situ TEM observations show that at low temperature the deformation is mainly due to the formation of the Orowan loops around the particle. At high temperature the activation energy is about 3.4 eV for ODS, whereas it is 1.3 eV for EUROFER97. The calculated activation energy corresponds well to the one of dislocation climb mechanism. This indicates that at high temperature the yttria particles could be overcome by climb, while at low temperature they are overcome by the Orowan mechanism. The peculiar response of the yield stress to irradiation for this class of material was rationalized using the total hardening model we developed. At a dose of 2 dpa, irradiation induced defects are higher in number density than the dispersed yttria particles, which although they are weaker than the yttria particles they can explain the significant hardening observed in the material. Conversely, the shallow impact of irradiation on ODS F/M steels at low doses, relative to base F/M steels, is explained by the fact that the amount of dispersoid is found to be higher than the density of irradiation induced defects.

EPFL2008

Engineering the ZrO2–Pd Interface for Selective CO2 Hydrogenation by Overcoating an Atomically Dispersed Pd Precatalyst

Alimohammad Bahmanpour, Yuan-Peng Du, Florent Emmanuel Héroguel, Oliver Kröcher, Jeremy Luterbacher, Mounir Driss Mensi, Luka Milosevic

Tailoring the interfacial sites between metals and metal oxides can be an essential tool in designing heterogeneous catalysts. These interfacial sites play a vital role in many renewable applications, for instance, catalytic CO2 reduction. Postsynthesis deposition of metal oxide on supported metal catalysts can not only create such interfacial sites but also prevent particle sintering at high temperature. Here, we report a sol–gel-based strategy to synthesize an atomically dispersed “precatalyst”. In contrast to the deposition on catalysts containing preformed nanoparticles, overcoating this material before reductive treatment can inhibit particle growth during thermal activation steps, yielding highly accessible, sintering-resistant Pd clusters that are less than 2 nm in diameter. This synthetic approach allows us to engineer interfacial sites while maintaining high metal accessibility, which was difficult to achieve in previous overcoated materials. Notably, engineering the Pd–ZrO2 interface into an inverted interface with an amorphous ZrO2 overcoat might facilitate a C–O cleavage route instead of a mechanism containing a bicarbonate intermediate during CO2 hydrogenation. We also observed that carbon deposition occurring on methanation sites could be a key factor for improving CO selectivity. Alteration of the reaction pathway, along with the deactivation of certain sites, led to 100% CO selectivity on the ZrO2@Pd/ZrO2 catalyst. This work demonstrated that overcoated materials could represent a promising class of heterogeneous catalysts for selective CO2 conversion over noble metals, which have higher rates and thermal stability compared to state-of-the-art Cu-based catalysts.