Micromachined Calibration Chip with Heat Source and Temperature Sensors for Scanning Thermal Metrology (SThM)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Low energy femtosecond laser pulses locally increase the refractive index and the hydro-fluoric acid etching rate of fused silica. These phenomena form the basis of a direct-write method to fabricate integrated glass devices that are of particular interest ...
Thermal management materials frequently have multi-phase composite character with complex architecture of the constituents. As a result, design rules are needed which can be used in selection of the phases and optimizing their volume fractions. The study s ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles, requests a good knowledge of the heat transfer and pressure drop properties of substitute fluids. A contribution to this international effort is proposed ...
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
The reliable prediction of pressure drop in two-phase flow is an important prerequisite to accurate optimization of thermal systems. Because of the complexity of these types of flow, empirical or semiempirical relationships are only of limited reliability ...
A heat sink that is particularly suitable for semiconductor components is made from a diamond-containing composite material. In addition to a diamond fraction amounting to 40-90% by volume, the composite material also contains 7 to 59% by volume copper or ...
In this paper we present the fabrication and characterization of highly sensitive cantilevers, with and without magnetic tip, used for magnetic resonance force microscopy experiments. The full wafer silicon batch microfabrication was successful and the ach ...
Spores of Bacillus subtilis ATCC 6051 and Bacillus stearothermophilus NCTC 10003 were immobilized in monodisperse alginate beads (diameter, 550 microm +/- 5%), and the capacity of the immobilized bioindicators to provide accurate and reliable F-values for ...
The project addresses the problem of chemical and mechanical stability of dense ceramic oxygen separation membrane for the partial oxidation (POX) of methane to synthesis gas. In operating conditions, the membranes are exposed to strong thermal and composi ...
