Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels
Publications associées (427)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Molecular simulations using the quasicontinuum method are performed to understand the mechanical response at the nanoscale of grain boundaries (GBs) under simple shear. The energetics and mechanical strength of 18 Sigma (I 10) symmetric tilt GBs and two Si ...
Nanostructured materials should present a good resistance to irradiation because the large volume fraction of grain boundaries can be an important sink for radiation-induced defects. The objective of the present study is to experimentally investigate the i ...
Charpy impact tests were performed on martensitic/ferritic (MF) steels T91, F82H, Optifer-V and Optimax-A/-C irradiated in SINQ Target-3 up to 7.5 dpa and 500 appm He in a temperature range of 120-195 degrees C. Results demonstrate that for all the four ki ...
We present an atomistic study of the plastic deformation mechanisms occurring in columnar structures of nanocrystalline Ni, with particular emphasis on the process of dislocation emission form the grain boundaries. The samples are constructed with grain bo ...
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
At early age, ultra high performance fibre reinforced concretes (UHPFRC)undergo significant volumes changes (thermal deformation and autogenous shrinkage)related to their composition. These deformations can be restrained by different elements respective to ...
Single-crystal nickel was irradiated with 590 MeV protons to 10(-1) dpa at room temperature. Irradiated and unirradiated tensile samples were deformed and relaxation tests were performed at temperatures between 77 and 423 K. The tests show a strong tempera ...
Microstructural analysis and mechanical testing have been performed on two types of nanocrystalline (NC) Ni samples and compared to coarse-grained (CG) Ni. The NC electrodeposited (ED) Ni is characterized by a mean grain size of 21 nm, a narrow grain size ...
The deformation mechanisms of silicon {001} surfaces during nanoscratching were found to depend strongly on the loading conditions. Nanoscratches with increasing load were performed at 2 μm/s (low velocity) and 100 μm/s (high velocity). The load-penetratio ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...