The accomplishment of the Engineering Design Activities of IFMIF/EVEDA: The European-Japanese project towards a Li(d,xn) fusion relevant neutron source

The International Fusion Materials Irradiation Facility (IFMIF), presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the frame of the Broader Approach Agreement between Europe and Japan, accomplished in summer 2013, on schedule, its EDA phase with the release of the engineering design report of the IFMIF plant, which is here described. Many improvements of the design from former phases are implemented, particularly a reduction of beam losses and operational costs thanks to the superconducting accelerator concept, the re-location of the quench tank outside the test cell (TC) with a reduction of tritium inventory and a simplification on its replacement in case of failure, the separation of the irradiation modules from the shielding block gaining irradiation flexibility and enhancement of the remote handling equipment reliability and cost reduction, and the water cooling of the liner and biological shielding of the TC, enhancing the efficiency and economy of the related sub-systems. In addition, the maintenance strategy has been modified to allow a shorter yearly stop of the irradiation operations and a more careful management of the irradiated samples. The design of the IFMIF plant is intimately linked with the EVA phase carried out since the entry into force of IFMIF/EVEDA in June 2007. These last activities and their on-going accomplishment have been thoroughly described elsewhere (Knaster J et al [19]), which, combined with the present paper, allows a clear understanding of the maturity of the European-Japanese international efforts. This released IFMIF Intermediate Engineering Design Report (IIEDR), which could be complemented if required concurrently with the outcome of the on-going EVA, will allow decision making on its construction and/or serve as the basis for the definition of the next step, aligned with the evolving needs of our fusion community.

Analysis of a Novel Toroidal Configuration for Hadron Therapy Gantries

Enrico Felcini

Hadron therapy refers to a medical treatment that uses hadron beams (i.e. protons and ions) to deliver localized energy that suppresses cancerous cells, sparing the neighbouring healthy tissues from unwanted radiation. The major technical components of a hadron therapy centre are the particle accelerator (cyclotron, synchrotron, or linac) and the beam delivery system that controls, shapes and orients the particles towards the area to be treated. The beam delivery can consist of fixed transfer lines, or it can include a gantry, a transfer line that rotates around the patient and allows radiation from multiple directions. The present work investigates a new toroidal gantry for hadron therapy, named GaToroid. This novel gantry configuration allows the dose delivery from a discrete number of angles avoiding magnets as well as patient rotation. Compared to traditional gantries that require rotating magnets, this improvement is made possible by a toroidal magnet operating in steady-state. This design constitutes the ideal conditions for the use of superconductors to generate a significantly higher magnetic field compared to normal-conducting solutions, as well as to reduce the weight and footprint of the magnets. The study of a GaToroid system requires the integration of several aspects of physics and engineering. In this framework, the focus of this research is on the design of the superconducting coils integrated with beam optics and particle tracking analyses. The first part of the thesis illustrates the optimization of the toroidal magnet. Coupling two-dimensional particle tracking and magnetic field calculations, an algorithm was developed to identify optimal gantry configurations that maximize the energy acceptance of the system. Two solutions composed of 16 coils, differing in high and low values of engineering current density, were investigated. In line with current clinical requirements, the beams converged at the isocenter within 1 mm over the whole treatment energy spectrum for both configurations. The second part of the thesis describes the algorithm implemented for the two- and three-dimensional particle tracking. Building upon the results of the magnetic optimization, a linear beam optics formalism was developed to determine the focusing properties of GaToroid. The third part of the thesis focuses on the engineering design of the low current density solution. Using two thermo-electric models, lumped and one-dimensional, the Nb-Ti and ReBCO cable geometries were validated, together with the quench protection system. Furthermore, analytical and numerical studies on mechanics made it possible to estimate the overall footprint and weight of the system. Results show that, compared with the state-of-the-art gantries, the proposed GaToroid solution has the potential to be more compact and lighter by at least a factor two. Finally, the last part of the thesis describes the design of a scaled-down demonstrator wound with ReBCO tapes. Studies on quench protection, mechanics and experimental implementation aimed at testing the use of ReBCO technology for GaToroid coils are discussed. In conclusion, this work presents the first overall description of a GaToroid system, ranging from the analytical definition, magnetic optimization, particle tracking and magnet engineering. The investigation of this new toroidal paradigm for gantries represents a quantum step toward more compact and less expensive solutions for hadron therapy centres.

EPFL2021

Analysis of a Novel Toroidal Configuration for Hadron Therapy Gantries

Enrico Felcini

EPFL2021